
10. INTERFACE
10.6 ATE | Command Echo |
|
|
|
|
|
|
| Description | Command | Possible Responses |
|
|
|
|
| Request Command | ATE[<value>] | • OK |
| Echo | ATE=[<value>] | • ERROR |
|
|
|
|
| Show the current | ATE? | <value> |
| setting |
|
|
|
|
|
|
| Show if the command | ATE=? | E: (list of supported |
| is supported |
| <value>s) |
|
|
|
|
The setting of this parameter determines whether or not the DCE echoes characters received from the DTE during command state and online command state.
<value> Description
0DCE does not echo characters during command state and online command state
1DCE echoes characters during command state and online command state. Default value
10.7 ATV | DCE Response Format |
|
| |
|
|
|
| |
| Description | Command | Possible Responses | |
|
|
|
|
|
| Set DCE response | ATV[=]<value> | • | OK |
| format |
| • | ERROR |
|
|
|
| |
| Read the current | ATV? | V: <value> | |
| setting |
|
|
|
|
|
|
| |
| Show if the command | ATV=? | V: (list of supported | |
| is supported |
| <value>s) | |
|
|
|
|
|
Select either descriptive or numeric response codes. The ATV command sets the verbose numeric response codes and strips off the <S3><S4> additions to the command response.
<value> | Description |
|
|
0 | Display numeric result codes |
|
|
1 | Display verbose result codes. Default value |
|
|
137
LZT 123 7361 R1A