Standard Horizon GM29 manual 11.14 AT+COPS Operator Selection, At+Cops?, At+Cops=?

11.NETWORK

11.14AT+COPS Operator Selection

Description	Command	Possible Responses
Request operator	AT+COPS=[<mode>	• +CME ERROR <err>
selection	[,<format>	• OK
	[,<oper>]]]	• ERROR
Shows the current	AT+COPS?	• +COPS:
setting		<mode>[,<format>,
		<oper>]
		• +CME ERROR <err>
		• OK
		• ERROR
Show if the command	AT+COPS=?	• +COPS: list of supported
is supported		(<stat>,long
		alphanumeric <oper>,
		short alphanumeric
		<oper>,numeric
		<oper>)s
		• +CME ERROR <err>
		• OK
		• ERROR

Forces an attempt to select and register the GSM network operator.

<mode>	Description
0	Automatic (<oper> field is ignored)
1	Manual (<oper> field present)
3	Set only <format> (for read command +COPS?), do not
	attempt registration/de-registration (<oper> field is
	ignored); this value is not applicable in read command
	response
4	Manual/automatic (<oper> field present); if manual
	selection fails, automatic mode (<mode>=0) is entered
<format>	Description
0	Automatic (<oper> field is ignored)
1	Short format alphanumeric <oper>
2	Numeric <oper>
<oper>	Description
string type	Format determined by the <format> setting

163

LZT 123 7361 R1A