Pioneer Mastering Copying and Back-up Features of the DVD Recorders

07Copying and back-up

•Select CAPS or small to change to upper or lower- case, or use the CASE SELECTION buttons (

).

•You can also use the CLEAR button to delete characters directly (press and hold for two seconds to delete the whole name). For other remote control key shortcuts, see Using the remote key shortcuts to input a name on page 72.

•For discs formatted on a different DVD recorder, you will see only a limited character set.

4Highlight ‘OK’ then press ENTER to enter the name and return to the Copy List.

•To return to the main Copy List screen without saving changes to the title name, press RETURN.

Erase Section

Using this command you can delete a part of a Copy List title, ideal for cutting out the commercial breaks in a recording made from the TV.

1Highlight the title containing the section you want to erase.

2Select ‘Erase Section’ from the command menu panel.

The Erase Section screen appears from which you can mark the start and end points of the section to erase.

3Select the type of edit.

!DVD RECORDER

Please select the type of editing. Video Mode Compatible Editing is recommended for compatibility with high-speed copying.

Video Mode Compatible Editing

Frame Accurate Editing

•Video Mode Compatible Editing – Edit points cannot be set with absolute precision, but high- speed copying to Video mode DVD will be possible.

•Frame Accurate Editing – Exact edit points are preserved, but high-speed copying to Video mode DVD will not be possible.

•For more information about these options, see Editing accuracy on page 70

4 Highlight ‘From’ then use the playback controls ( , , , , etc.) to find the start of the section to erase, then press ENTER.

The bar at the bottom of the screen indicates the current play position in the title. After pressing ENTER, a marker shows the start of the section.

Erase Section	(HDD Copy)
	19:00 Mon		29/11 Pr 2	SP
	Rec. time		0h01m
	5-1	00.00.09.15
	Play Pause
From
To
Exit

5Highlight ‘To’ then, in the same way, find the end of the section to erase, then press ENTER.

After pressing ENTER, another marker indicates the end of the section, with the section itself marked in red.

6Select ‘Yes’ to confirm, or ‘No’ to cancel, then press ENTER.

!Erase ?

Yes No

In the thumbnail viewer you can see a few seconds of video either side of the marked section to see how the edit will look.

Move

Use this command to change the order of titles in the Copy List.

1Highlight the title you want to move and press

ENTER.

2Select ‘Move’ from the command menu panel.

3Move the insert bar to the new position for the title and press ENTER.

		Title to move						Insertion position
Copy	HDD DVD (Video mode)						3	Title
Edit Title
	1	19:00 Mon	29/11 Pr 2		SP
	2	19:00 Mon	29/11 Pr 2		SP			Return
	3	19:00 Mon	29/11 Pr 2		SP
								Next
		19:00 Mon 29/11				Pr 2	SP
							2h00m(1.0G)
	Copy List Total			1.2G
	Current DVD Remain			1.2G

64

En