Pioneer DVR-630H-S, DVR-530H-S manual Connect RF antenna cables as shown

Connecting up 02

Connecting to a cable box or satellite receiver (1)

If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page1. If many or all the channels are scrambled, we recommend using the setup on the following page.

Using the setup on this page you can:

•Record unscrambled channels by selecting them on this recorder.

•Record scrambled channels by selecting them on the cable box/satellite receiver and using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 46).

•Watch one channel while recording another.

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amp/receiver.

		A/V
		IN 1
TV	ANTENNA
	IN
	1	2
A/V	ANTENNA
OUT
	OUT

3	Cable box/	ANTENNA
	Satellite receiver	IN

1

ANTENNA

OUT

AC IN

CONTROL

IN OPTICAL DIGITAL OUT

INPUT 1/									ANTENNA
AUTO START REC							OUTPUT 1
R	L			R	L			Y	PB	OUT
									IN
								COMPONENT
								VIDEO OUT	PR
	AUDIO	VIDEO	S-VIDEO		AUDIO	VIDEO	S-VIDEO
		INPUT 3				OUTPUT 2

ANTENNA

IN (RF IN)

1

1 Connect RF antenna cables as shown.

This enables you to watch and record TV channels.

2Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied).

This enables you to watch the output from this recorder.

Antenna/cable TV wall outlet

3Connect the audio/video output of your cable box/satellite receiver to the INPUT jacks on this recorder using a set of A/V cables.

This enables you to record scrambled TV channels.

Note

1. The diagram shows standard video connections, but you can alternatively use the S-video or component video connections if they’re available.

15

En