Pioneer DVR-630H-S Connecting up Connecting a USB device, Plugging, Jpeg file storage devices

Connecting up 02

Connecting a USB device

Using the USB ports on the front and rear of the recorder you can connect USB devices such as digital cameras, printers and keyboards. Please also see the instructions that came with the device you want to connect before using.

	AC IN
USB	USB
Type A	Type B

USB USB

Digital Camera	PictBridge-compatible
	Printer

Keyboard

Using a USB keyboard

•Do not use a PS/2 keyboard connected using a PS/2–USB adapter.

Plugging in

After checking all the connections, plug in the recorder.

1Use the supplied power cable to connect this recorder to a power outlet.

Important

•We recommend connecting USB devices when this recorder is switched off (in standby).

JPEG file storage devices

•Digital still camera

•Memory card reader (any type of memory card)

•USB memory

The Mass Storage Class (MSC) device should be FAT- compatible. Note that if the device is partitioned, this recorder may not recognize it.

The Picture Transfer Protocol (PTP) can be used to transfer up to about 4,000 files.

Using a USB hub

•Use a hub compatible with USB 1.1 and/or 2.0.

•Use an independently powered hub (bus powered hubs may not work reliably)

•In the event of unreliable operation with the hub, we recommend plugging the device directly into the recorder’s USB port.

•Operation may become unreliable if too many devices are connected to the hub. In this case, try unplugging some devices.

•If the power delivered through a hub is insufficient for the devices connected, communication can become unreliable. In this case, disconnect one or more devices and then perform a USB restart (see Restart USB Device on page 97).

Using a USB printer

• Use a PictBridge-comaptible printer.

19

En