Pioneer DVR-530H-S, DVR-630H-S manual Initial Setup menu Chapter, Using the Initial Setup menu

13The Initial Setup menu

Chapter 13

The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu.

Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

•Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •.

Tip

•Some of the Initial Setup menu screens shown in this section vary slightly depending on the country or region of purchase.

Setting	Options	Explanation
Basic Settings
Clock Setting	Auto	Set the channel that broadcasts a clock signal and the clock will be set
		automatically.
	Manual •	If there is no channel that broadcasts a clock signal in your area, you
		can set the time and date manually.
	Display	Set preferences for time and date display format.

The clock must be set in order to use timer recording.

Input Line System	525 System	Use for NTSC or PAL-60 recording from an external input.
	625 System •	Use for standard PAL or SECAM recording.

See also About the input line system on page 98 for more information on this setting.

Power Save	On	No antenna input signals are passed through to the outputs when the
		recorder is in standby.
	Off •	When the recorder is in standby, all signals arriving at the antenna
		inputs are passed along to the outputs.
Help Setting	On •	Switches on the automatic Help screens for GUI displays.
	Off	Switches off the automatic Help screens for GUI displays. (Press HELP
		on the remote to manually display the Help screen.)
Setup Navigator	Start	Select to start the Setup Navigator. See also Switching on and setting
		up on page 24.

92

En