Pioneer DVR-530H-S, DVR-630H-S manual Additional information, Message

14Additional information

Message

•There is no DV input or the input signal is unre- cordable.

•Cannot preview because there is no DV input or the input signal is unrecordable.

Explanation/Action

No signal was detected at the DV IN jack. This may appear if a blank section of DV tape is playing in the connected camcorder.

•HDD optimization is recommended. This can be done using Disc Setup.

•Please perform HDD optimization. This can be done using Disc Setup.

•The HDD has not been sufficiently optimized. Please optimize again.

The HDD should be optimized (basically, HDD housekeeping) to maintain playback and recording performance.

The HDD is in more urgent need of optimization in order to maintain performance.

If this message appears repeatedly after optimizing the HDD it is likely that there is not enough free space on the HDD for optimization to complete properly. Please erase some titles from the HDD and optimize again.

•This channel’s TV system is different from the recorder’s setting.

•Recording failed due to a TV system mismatch. Press DISPLAY to clear message.

•Playback has stopped because the TV system is different than the recording.

The TV system (PAL, NTSC, etc.) of the current channel is different from the TV system settings of this recorder.

The timer recording failed because the TV system of the channel set for recording was different from the setting of the recorder.

During recording or timer recording standby, the TV System (PAL, NTSC, etc.) of the playback video changed, causing playback to stop automatically.

110

En