JVC GR-DX317 Random Assemble Editing R.A.Edit, Set Remote/VCR Code, Editing En, Vcr Code List

RM-V717U (optional)

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like. R.A.Edit is more easily performed when the MBR (Multi-Brand Remote) is set to operate with your brand of VCR (see “VCR CODE LIST”), but can also be performed by operating the VCR manually.

●Use the optional remote control kit RM-V717KITU. It is a

set composed of RM-V717U remote control, an Editing cable* and an Editing extension cable.

*The Editing cable is not required with this camcorder. ● Refer to remote control kit’s instructions as well.

Set Remote/VCR Code

1 Turn off the power to the	SHIFT MBR SET
VCR and point the remote
towards the VCR’s infrared
sensor. Then, referring to the
VCR CODE LIST, press and
hold MBR SET, and enter the
brand code.
The code is automatically set
once you release MBR SET,
and the VCR’s power comes
on.

2 Make sure the VCR’s power is on. Then, while holding SHIFT, press the button on the remote for the desired function. The functions the remote can

control are PLAY (U), STOP (8), PAUSE (9), FF (5), REW (3) and VCR REC STBY (79; you do not need to press SHIFT for this one).

You are now ready to try Random Assemble Editing.

IMPORTANT:

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

NOTES:

●If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.

●Some brands of VCR do not come on automatically. In this case, turn the power on manually and try step 2.

●If the remote control is not able to control the VCR, use the controls on the VCR.

●When the remote control’s batteries run out, the VCR brand you have set will be erased. In that case, replace the old battery with a new one to reset the VCR brand.

EDITING EN 41

VCR CODE LIST

BRAND NAME	CODE
AKAI	62, 64, 77
BLAUPUNKT	13
DAEWOO	18
FERGUSON	97, 98, 32
GRUNDIG	14, 34
HITACHI	66, 63
JVC A	91
JVC B	96
JVC C	93
LG/GOLDSTAR	11
MITSUBISHI	67, 68
NEC	37, 38
PANASONIC	13, 17, 11, 94, 18
PHILIPS	19, 95, 11, 94, 91, 96, 12, 33, 72
SAMSUNG	94
SANYO	36, 35
SELECO, REX	91, 96
SHARP	15, 10
SONY	65, 60, 39, 31
THOMSON,	91, 96, 97, 32
TELEFUNKEN, SABA,
NORDMENDE
TOSHIBA	69, 61	FEATURES
Buttons And Functions (RM-V717U)
A Infrared beam transmitting window
Transmits the beam signal.
B DISPLAY Button*		ADVANCED
C SHIFT Button (see the left column)
D SLOW Rewind/Forward Buttons*
Left/Right Buttons*
E REW Button*
F FADE/WIPE Button ( pg. 43)
G EFFECT ON/OFF Button*
H EFFECT Button*
I PAUSE IN Connector ( pg. 42)
J MBR SET Button (see the left column)
K Up Button*
INSERT Button*
L Down Button*
A. DUB Button*
M PLAY Button*
N FF Button*
O STOP Button*
P PAUSE Button*
Q R.A.EDIT Buttons
( pg. 43, 44)
a Zoom (T/W) Buttons*
b START/STOP Button*
c SNAPSHOT Button*

*Functions the same as each corresponding button on the provided remote control RM-V720U (
pg. 19)