10 EN GETTING STARTED |
|
| |
How To Attach The Lens Cap | How To Attach The Core Filter (for USB Cable and | ||
To protect the lens, attach the | Audio Extension Cable) | ||
provided lens cap to the | Attach the core filters to the cables. The core filter | ||
camcorder as shown in the | |||
reduces interference. | |||
illustration. | |||
1 Release the stoppers on both ends of the core filter. | |||
NOTE: | |||
|
| ||
To confirm the lens cap is on |
|
| |
correctly make sure the cap is flush |
|
| |
to the camcorder. |
| Stopper | |
|
| ||
| 2 Run the cable through the core filter, leaving approx. | ||
| 3 cm of cable between the cable plug and the core filter. | ||
| USB cable |
| |
| Wind the cable once around the outside of the core filter | ||
| as shown in the illustration. | ||
| 3 cm | Core filter (large) | |
Place here during shooting.
Wind once.
How To Use The Audio Extension Cable
Audio Extension cable
Wind the cable twice around the outside of the core filter as shown in the illustration.
When using an optional external microphone, connect to the provided Audio extension cable (with a core filter attached), then connect the Audio extension cable to the camcorder. The core filter reduces interference. (See the right column.)
Open the cover. 
To MIC 
Audio extension cable 
(provided) 
Core filter
3 cm | Core filter (small) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wind twice.
●Wind the cable so that it is not slack.
3 Close the core filter until it clicks shut.
USB cable | Audio Extension cable |
Stereo microphone
NOTES:
● Take care not to damage the cable.
●When connecting a cable, attach the end with the core filter
to the camcorder.
