JVC GR-DX307, GR-DX107 Dubbing To Or From a VCR, Editing EN, To use this camcorder as a player

EDITING EN 37

Dubbing To Or From A VCR					To use this camcorder as a player
					1 Following the illustrations, connect the camcorder and
					the VCR’s input connectors.
					2 Start playback on the camcorder. ( pg. 17)
			To AV connector		3 At the point you want to start dubbing, start recording
					on the VCR. (Refer to the VCR’s instruction manual.)
Open the cover.					4 To stop dubbing, stop recording on the VCR, then stop
S/AV/Editing cable				mark	playback on the camcorder.
	(provided)				NOTES:
					● It is recommended to use the AC Adapter as the power
					supply instead of the battery pack. ( pg. 11)
					● To choose whether or not the following displays appear on
					the connected TV
					• Date/time
					Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
1	2	3	4	5	( pg. 27, 31) Or, press DISPLAY on the remote control
					to turn on/off the date indication.
					• Time code
					Set “TIME CODE” to “OFF” or “ON”. ( pg. 27, 31)
					• Indications other than date/time and time code
	“Y/C”/“CVBS”			Cable Adapter*	Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
					( pg. 27, 31)
Video Out Select					To use this camcorder as a recorder
		Switch

To VCR	1 Following the illustrations, connect the camcorder and
	the VCR’s output connectors.
	2 Set “REC MODE” to “SP” or “LP”. ( pg. 27, 28)
TV	3 Set the camcorder’s Power Switch to “PLAY”.
	4 Set “S/AV INPUT” to “A/V.IN” or “S.IN”*.
VCR	( pg. 27, 30)
	* Select “S.IN” when using S-VIDEO OUT connector on your
	TV/VCR.

A Remote plug: Not connected (When not in use, keep the Remote plug in its protective caddy.)

B To S-VIDEO IN or OUT** C Yellow to VIDEO IN or OUT D Red to AUDIO R IN or OUT E White to AUDIO L IN or OUT

*If your VCR has a SCART connector, use the provided cable adapter. (The provided cable adapter accepts only output signals from this camcorder. To use this camcorder as a recorder, use a commercially available cable adapter.)

**Connect when your TV/VCR has an S-VIDEO IN/OUT connector. In this case, it is not necessary to connect the yellow video cable.

NOTE:

Set the video out select switch of the cable adapter as required:

5 Press the Recording Start/Stop Button to engage the Record-Pause mode.

●The “ A/V.IN ” or “ S.IN ” indication appears on the screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start dubbing. The indication rotates.

8 Press the Recording Start/Stop Button again to stop

dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.

NOTES:

●After dubbing, set “S/AV INPUT” back to “OFF”.

●Analogue signals can be converted to digital signals with this procedure.

●It is also possible to dub from another camcorder.

ADVANCED FEATURES

Y/C: When connecting to a TV or VCR which accepts Y/ C signals and uses an S-Video cable.

CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.