SYSTEM
Each setting is linked with “s SYSTEM”, which appears when the Power Switch is set to “M”.
●The parameters are the same as in the description on page 29.
VIDEO DISPLAY
The “n” (VIDEO DISPLAY) settings are effective only for video playback except “BRIGHT” and “AUX MIC”.
●The parameters (except “OFF” in ON SCREEN settings) are the same as in the description (CAMERA DISPLAY) on page 29.
[ ] = Factory-preset
BRIGHT
pg. 13, “Brightness Adjustment Of The Display”
ON SCREEN | OFF / [LCD] / LCD/TV |
When set to “OFF”, the camcorder’s display disappears.
DATE/TIME | [OFF] / AUTO / ON |
When set to “AUTO”, the date/time are displayed in the following cases:
●When playback starts. The camcorder displays the date/ time when scenes are recorded.
●When the date is changed during playback.
TIME CODE | [OFF] / ON |
|
|
AUX MIC | OFF / [ON] |
pg. 30, “AUX MIC”
FEATURES FOR RECORDING EN 31
LED Light
LED Light can be used to brighten the subject in the dark place during video recording or D.S.C. shooting.
1 Press LIGHT repeatedly to change the setting.
OFF: Turns off the light. |
| |
ON: The light is on always. ( | appears.) | |
AUTO: The light turns on automatically | ||
when dark. ( | appears.) | LED Light |
2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image.
NOTES:
●Be careful not to point the LED Light directly to eyes.
●If the light does not reach the subject, the
●There is a difference in the brightness of the images shot between the centre area which is illuminated by the LED Light and the surrounding areas (which will be darker).
●Since subjects are shot at a reduced shutter speed when the LED Light setting is “ON”, they will appear slightly blurred.
●Under certain low light conditions the DIS function will not
be available. The “ 
” indicator blinks. ( pg. 28)
Self-Timer
Once the camcorder is set, the camcorder operator can | FEATURES | |||||||||||
become part of the scene in a more natural way, adding | ||||||||||||
| ||||||||||||
the final touch to a memorable picture. |
|
|
|
| ||||||||
1 Set the Power Switch to “M”. |
|
|
|
| ||||||||
2 Set |
|
|
|
| ADVANCED | |||||||
| MANUAL |
| ||||||||||
( pg. 27, 28) |
|
|
|
|
| SELF – T I MER – OF F |
| |||||
● The “ ” indicator appears. |
| ON |
| |||||||||
|
|
|
| |||||||||
3 For video recording, press the |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
| ||||||||
Recording Start/Stop Button. |
|
|
|
| ||||||||
● The tally lamp starts blinking. |
|
|
|
| ||||||||
RETURN |
| |||||||||||
|
| |||||||||||
●After 15 seconds, the beep sounds and video recording starts. The tally lamp stays on.
To stop
●The camcorder
OR
3 For snapshot, press SNAPSHOT.
●The tally lamp starts blinking.
●After 15 seconds, the beep sounds and snapshot recording starts. The tally lamp turns off. After that, the camcorder re- enters
4 To end Self-Timer recording, select “OFF” in step 2.
NOTE:
If “BEEP” and “TALLY” are set to “OFF” ( pg. 29), the beep does not sound and the tally lamp does not light.
