30 EN MENUS FOR DETAILED ADJUSTMENT
TIME CODE |
|
|
|
| Playback Menus | |
[OFF]: Time code is not displayed. |
|
| ||||
|
|
| ||||
ON: Time code is displayed on the camcorder and on the |
|
| VIDEO | |||
connected TV. Frame numbers are not displayed during |
|
|
| |||
[ ] = | ||||||
recording. ( pg. 17) | ||||||
|
|
| SOUND MODE and NARRATION | |||
AUX MIC |
|
| ||||
|
| During tape playback, the camcorder detects the sound | ||||
OFF: Auxiliary microphone level indicator does not | ||||||
mode in which the recording was made, and plays the | ||||||
appear. | ||||||
sound back. Select the type of sound to accompany your | ||||||
[ON]: Displays auxiliary microphone level indicator when | ||||||
playback picture. According to the menu access | ||||||
optional microphone is connected. ( pg. 7) | ||||||
explanation on page 27, select “SOUND MODE” or | ||||||
|
|
| ||||
|
|
| “NARRATION” from the Menu Screen and set it to the | |||
CLOCK ADJ. |
|
| ||||
|
| desired parameter. | ||||
pg. 12, “Date/Time Settings” | ||||||
|
|
| ||||
DSC
[ ] =
QUALITY
SOUND MODE
[STEREO 
![[FINE] / STANDARD](/images/new-backgrounds/161382/16138259xi5.webp){kind=small}
]: Sound is output on both “L” and “R” channels in stereo.
SOUND L 
: Sound from the “L” channel is output.
SOUND R 
: Sound from the “R” channel is output.
[FINE] / STANDARD
The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available:
FINE ( 
) and STANDARD ( 
) (in order of quality).
NOTE:
The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used.
( pg. 21)
IMAGE SIZE
640 x 480 / 1024 x 768 / [1280 x 960] / 1600 x 1200 The Image Size mode can be selected to best match your needs. ( pg. 21)
NOTE:
The setting can be changed only when the VIDEO/MEMORY Switch is set to “MEMORY”.
REC SELECT
[ 
(TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.
/
(TAPE/CARD): When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in CAMERA Menu is also applicable to memory card recording.
INT.SHOT
[OFF]: Disables the function.
ON: Enables interval shooting. ( pg. 21)
INT.TIME
15SEC / 30SEC / [1MIN] / 2MIN / 5MIN / 10MIN / 30MIN / 60MIN Allows you to select the shooting interval for interval shooting. ( pg. 21)
NARRATION
[OFF]: Original sound is output on both “L” and “R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R” channels in stereo. ( pg. 40)
MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.
SYNCHRO
pg. 44, “For More Accurate Editing”
REC MODE | [SP] / LP |
Allows you to set the video recording mode (SP or LP) depending on your preference. It is recommended you use “REC MODE” in VIDEO Menu when using this camcorder as a recorder during dubbing. ( pg. 37, 38)
COPY
[OFF]: When the SNAPSHOT button is pressed during tape playback, the playback image pauses and normal playback will resume after approximately 6 seconds.
(The still image is not recorded.)
ON: Enables dubbing of images recorded on a tape to a memory card. ( pg. 24)
NAVI.DEL.
IMAGE SEL. / TAPE SEL. / ALL / RETURN
pg. 36, “To delete thumbnail images”
BLANK SRCH
pg. 18, “Blank Search”
S/AV INPUT
[OFF]: Disables audio/video signal input from the AV connector. ( pg. 37)
A/V.IN: Enables audio/video signal input from the AV connector. ( pg. 37)
S.IN: Enables
