ENGLISH
5 Play back disc | 1 | 2 | 3 | 4 | 5 |
|
1 Press BD two times in a row to switch an input source for a player used for playback.
2 Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand.
3 Adjust the sound volume.
VOLUME + | ...................................... Volume up |
VOLUME – | ................................. Volume down |
MUTE | Muting |
4 Set the listening mode.
Set the listening mode according to the playback contents (cinema, music, etc.) or according to your liking (vpage 46 “Selecting a listening mode (Surround mode)”).
When power is switched to standby
Press STANDBY.
GPower indicator status in standby modeH
• Normal standby : Red
• When “HDMI Control” is set to “ON” : Orange
• When “Network Standby” is set to “ON” : Orange
You can also switch the power to standby by pressing ON/STANDBY on the main unit.
NOTE
During power standby, a minimal amount of power is consumed. To totally cut off the power, remove the power cord from the power outlet.
12
