Marantz SR7005 manual Audio Adjust, NnSurround Parameter, NnTone

SVENSKA NEDERLANDS

Audio Adjust

nnSurround Parameter Default settings are underlined.

Adjust surround sound parameters. It may not be possible to set this item depending on the input signal.

Setting items	Setting details
HT-EQ	ON : “HT-EQ” is used.
Soften the treble range	OFF : “HT-EQ” is not used.
of movie soundtracks for
better understanding.
DRC	Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range	source. This can be set in the Dolby TrueHD mode.
(difference between loud	Low / Mid / High : These set the compression level.
and soft sounds).	OFF : Dynamic range compression always off.
D.Comp	Low / Mid / High : These set the compression level.
Compress dynamic range	OFF : Turn dynamic range compression off.
(difference between loud
and soft sounds).

ESPAÑOL	ITALIANO		FRANÇAIS	DEUTSCH	ENGLISH
				Audio/Video Adjust
Setting items			Setting details
Height Gain		Low : Reduce the front height channel volume.
Control the front	height	Mid : Front height channel sound is output with standard sound volume.
channel volume.		High : Increase the front height channel volume.
		NOTE
		“Height Gain” is displayed for the following settings.
		• When “Amp Assign” (vpage 80) is set to “Normal”.
		• When the “Speaker Config.”		– “F.Height” setting (vpage 80) is set
		other than to “None”.
		• When surround mode is “PLgz” or the PLgz decoder is used.
Default		Yes : Reset to the defaults.
The “Surround Parameter”		No : Do not reset to the defaults.
settings are returned to the
default settings.

nnTone

Adjust the tonal quality of the sound.

Simple version

Basic version

LFE

Adjust the low-frequency effects level (LFE).

–10dB – 0dB

For proper playback of the different sources, we recommend setting to the values below.

•Dolby Digital sources : “0dB”

•DTS movie sources : “0dB”

•DTS music sources : “–10dB”

Setting items	Setting details
Tone Control	ON : Allow tone adjustment (bass, treble).

Set the tone control function OFF : Playback without tone adjustment.
to ON and OFF.	“Tone Control” can be set when “Dynamic EQ” (vpage 76) is set to
	“OFF”.

NOTE

Advanced

C.Image	0.0 – 1.0 (0.3)
Assign center channel
signal to front left and right
channels for wider sound.
Panorama	ON : Set.
Assign front L/R signal also	OFF : Do not set.
to surround channels for
wider sound.
Dimension	0 – 6 (3)
Shift sound image center
to front or rear to adjust
playback balance.
C.Width	0 – 7 (3)
Assign center channel
signal to front left and right
channels for wider sound.

•“Tone Control” settings are not reflected to ZONE2 and ZONE3.

•The tone cannot be adjusted in the direct mode.

Bass	–6dB – +6dB
Adjust low frequency range	“Bass” can be set when “Tone Control” is set to “ON”.
(bass).
Treble	–6dB – +6dB
Adjust high frequency range	“Treble” can be set when “Tone Control” is set to “ON”.
(treble).

version

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	75
buttons	(Up/Down/Left/Right)