ENGLISH
Video output
Video Connection
The video signals of this unit’s ZONE2 video output terminal are played by the ZONE2 TV.
Playback
1 Press Z2 or Z3 to switch the remote control operating mode.
The remote control unit switches to the operating mode for ZONE2 or ZONE3.
Adjusting the volume
Use VOLUME to adjust the volume.
GAdjustable rangeH – – –
(When the “Volume Display” (vpage 86) setting is “Relative”)
MAIN ZONE
This unit
ZONE2
VIDEO
IN
VIDEO
ZONE2 | COMPONENT |
| |
| VIDEO IN |
| Y PB PR |
2 Press ON to turn on the ZONE2 or ZONE3 power.
The 
or 
indicator on the display lights.
• When STANDBY is pressed, ZONE2 or ZONE3 turns off.
• Power in ZONE2 or ZONE3 can be turned on or off by pressing SOURCE ON/OFF on
the main unit.
GAdjustable rangeH | 0 – 41 – 99 |
(When the “Volume Display” (vpage 86) setting is “Absolute”)
•At time of purchase, “Volume Limit” (vpage 85) is set to
Turn VOLUME after pressing ZONE SELECT on the main unit to adjust the sound volume.
NOTE
•It is not possible to output video signals input to the HDMI terminals to ZONE2.
•When using component output terminal 2 for ZONE2 video signal output, set “Manual Setup” – “Option Setup” – “Component2 Output” (vpage 87) in the menu to “ZONE2”.
•The menu screen is not output.
3 Press INPUT df.
The audio signal of the selected source is output to ZONE2 or ZONE3.
•Turn INPUT SELECTOR after pressing ZONE SELECT on the
main unit to select an input source.
When power for both MAIN ZONE and ZONE2 is set to ON, power of
the MAIN ZONE only can be turned off. Select “AMP” in step 1 then press STANDBY.
Turning off the sound temporarily
Press MUTE.
The sound is reduced to the level set at “Mute Level” (vpage 86) in the menu.
•To cancel, either adjust the volume or press MUTE again.
•The setting is canceled when the zone’s power is turned off.
You can adjust the tone and volume for ZONE2 and ZONE3 in “Zone Setup” (vpage 85) in the menu.
64
