SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Operating macro function
•When the macro function is used, operations that usually require a
complicated series of multiple button operations can be performed easily just by pressing the MACRO button.
•This device can remember up to 6 macro functions.
•Each macro can record a maximum of 10 steps.
[Example] To playback a DVD qTurn this unit’s power on
↓
wSwitch this unit's input source to DVD
↓
eTurn the TV’s power on
↓
rDVD Playback
Recording macro operations
[Example] Recording DVD playback operations to the number “1” button
1 Press and hold SET and MACRO together until “MACRO” flashes in the LEARN indicator, MACRO indicator and remote control display.
2 Press the macro operation number (“1”) that you want to record to.
• If the number that you want to record to has already been recorded to, the recorded number flashes in the display.
3 Press the input source switch button (“DVD”) of the operation that you want to record along with the command button (“1”).
The macro operation step number is shown in the remote control display.
•To record the amp input source, press AMP first, followed by the input source switching button.
4 When the macro operation recording is complete, press and hold ENTER until the LEARN indicator and MACRO indicator switch off.
NOTE
The RETURN, uio p, ENTER, VOLUME +, – and CLR buttons cannot be recorded as macro operations.
Checking recorded macro operations
[Example] Checking the recorded macro operations to button “1”
1 Press and hold MACRO and MENU together until “MACRO” flashes in the LEARN indicator, MACRO indicator and remote control display.
2 Press the number button (“1”) that you want to check.
The LEARN indicator, MACRO indicator and
3 Press the VOLUME +,
• The LEARN indicator switches off, and
• The recorded macro operation is performed.
4 Repeat step 3 until the final number of the macro operation is displayed.
•The display returns to that of step 1.
•When the macro operation number is displayed, the corresponding macro operation is performed.
5 When the macro operation check is complete, press and hold ENTER until the MACRO indicator switches off.
Editing recorded macro operations
[Example] Changing macro operation “1” recorded on number button “1” to “3”, and changing the number button to“2”
1 Press and hold MACRO and MENU together until “MACRO” flashes in the LEARN indicator, MACRO indicator and remote control display.
2 Press the number button (“1”) that you want to change.
The LEARN indicator, MACRO indicator and
3 Press ui to select the macro operation button (“2”) to edit.
After the macro operation button is displayed, the recorded operation is performed.
•When the macro operation is updated as a recorded step, press
the input source switching button, and then press the new step button (“2”).
•To insert a new macro operation between recorded steps, after performing step 3, press MEMORY and then press the new step button (“2”).
When a new step is introduced, if the total number of steps is already 10, the 10th step is deleted after the new step is introduced.
•To delete recorded macro operations, after step 3, call the step number that you want to delete, and press CLR.
•To return to step 1, press ENTER.
4 When the macro operation edit is complete, press and hold ENTER until the MACRO indicator switches off.
Simple version
Basic version
Advanced version
Information
97
