ENGLISH
Connect a device that has a multichannel output terminal
•You can connect this unit to an external device fitted with
•The video signal can be connected in the same way as a
Cables used for connections
| Audio cable (sold separately) |
| ||
Audio cable | (White) | L | L | |
(Red) | R | R | ||
| ||||
Audio cable |
|
|
|
External decoder
|
| AUDIO |
|
|
|
| |
SUB- | FRONT CENTER SURROUND SURROUND | ||
WOOFER |
|
| BACK |
L | R | L | R | L | R |
L | R | L | R | L | R |
Connecting a external power amplifier
•You can use this unit as a
•Select the terminal to use and connect the device.
Cables used for connections
| Audio cable (sold separately) |
| ||
Audio cable | (White) | L | L | |
(Red) | R | R | ||
| ||||
Audio cable |
|
|
|
Power amplifier
|
|
| AUDIO |
|
|
|
SUB- | FRONT | CENTER SURROUND | SURROUND | |||
WOOFER |
|
|
|
| BACK | |
| L | R | L | R | L | R |
| L | R | L | R | L | R |
L R | L R | L R |
|
| in Set as Necessary |
|
| To play analog signals input from 7.1CH INPUT |
|
| terminals, set “Input Mode” (vpage 73) to |
|
| “7.1CH IN”. |
|
| “7.1CH IN” can also be selected with A/D on |
L | R |
L R
L R
the remote control unit. |
When a device is connected to the SBL/SBR |
terminal of 7.1CH INPUT terminals, set “Amp |
Assign” (vpage 80) to “Normal”. |
•When using just one surround back speaker, connect it to the left channel (L) terminal.
•Use the volume control on the subwoofer to control subwoofer volume.
•If the subwoofer volume sounds low, use the volume control provided on the subwoofer to adjust the volume.
NOTE
•When an external power amp is connected to the PRE OUT terminal, do not connect speakers to the speaker terminals.
•Depending on the settings in the “Amp Assign” (vpage 80) menu or listening mode, the channel output from the SBL terminal or SBR terminal of the PRE OUT terminal differs.
24