ENGLISH
Input Setup
|
| Setting items | Setting details | |||||
|
|
|
|
|
|
|
| |
| Video Mode |
| Auto : Process video automatically based on the HDMI content | |||||
| Make settings for video | information. | ||||||
| processing. |
| Movie : Process video normally. | |||||
|
|
|
|
|
|
|
| Game : Always process video appropriate for game content. |
| BD |
|
| DVD |
|
| VCR | |
|
|
|
|
|
| |||
|
|
|
|
| z |
|
| |
| SAT |
|
| GAME |
|
| ||
Setting items | Setting details |
|
|
Resolution | Auto : The number of pixels the TV connected to the HDMI output |
Set the output resolution. | connector supports is detected automatically and the appropriate output |
Resolution (Analog) : | resolution is set. |
Analog Video | 480p / 576p / 1080i / 720p / 1080p / 1080p:24Hz : Set the output resolution. |
Resolution (HDMI) : HDMI |
|
|
|
| z | • If “Video Mode” is set to “Auto”, the mode is switched according to the |
|
|
| ||
AUX1 |
| TV | ||
| input contents. | |||
|
|
|
|
•If a source is played in both MAIN ZONE (audio and video) and ZONE2 (audio only) modes in the same room, audio in MAIN ZONE and ZONE2 modes may sound out of synchronization, but this is not malfunction. In this case, setting to “Game” mode may improve audio synchronization.
BD
SAT
AUX1
TV
DVD 
VCR
GAME z
NET/USB z
• This item can be set when “i/p Scaler” is set to anything other than |
“OFF”. |
• When “i/p Scaler” is set to ”Analog & HDMI”, the resolution of both the |
analog video input signal and HDMI input signal can be set. |
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video |
signals. |
Video Convert
The input video signal is converted automatically in conjunction with the connected TV (vpage 14 “Converting input video signals for output (Video conversion function)”).
BD 
DVD 
VCR SAT 
GAME z
AUX1 
TV z
ON : The input video signal is converted.
OFF : The input video signal is not converted.
•When a
•When “Video Convert” is set to “OFF”, the video conversion function does not work. In this case, connect this unit and TV with the same type of cable.
• When set to “1080p/24Hz”, you can enjoy |
sources (in 24 Hz). For video sources and mixed sources, we recommend |
setting the resolution to “1080p”. |
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output |
at a resolution of 1080p/50Hz. |
| Progressive Mode |
|
| Auto : The video signal is automatically detected and the appropriate | ||||
| Set an appropriate |
|
| mode is set. | ||||
| progressive conversion | Video1 : Select mode suitable for video playback | ||||||
| mode for the source video | Video2 : Select mode suitable for video and | ||||||
| signal. |
|
|
|
|
|
| playback. |
|
|
|
|
|
|
|
| This item can be set when “i/p Scaler” is set to anything other than |
| BD |
| DVD |
|
| VCR |
| |
|
|
|
| z |
|
| “OFF”. | |
| SAT |
| GAME |
|
| |||
i/p Scaler
Convert the input source’s
Analog : Use i/p scaler function for analog video signal.
Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
AUX1 TV z |
resolution to the resolution set at “Resolution”.
BD 
DVD 
VCR SAT 
GAME z
AUX1 
NET/USB TV z
HDMI : Use i/p scaler function for HDMI video signal.
OFF : Do not use i/p scaler function.
• “Analog & HDMI” and “HDMI” can be set for input sources for which an |
HDMI input connector is assigned. |
• Which items can be set depend on the input source assigned to each |
input connector. |
• This function is not effective when the input signal is x.v.Color, 3D, |
sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer |
resolution. |
Aspect
Set the aspect ratio for the video signals output to the HDMI.
BD 
DVD 
VCR SAT 
GAME z
AUX1 
NET/USB TV z
Full : Output at 16:9 aspect ratio.
Normal : Output at 4:3 aspect ratio.
“Aspect” can be set when “i/p Scaler” is set to anything other than “OFF”.
zz “GAME” or “TV” can be set when “HDMI” (vpage 71) or “Component” (vpage 71) has been assigned.
72
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | |
buttons | (Up/Down/Left/Right) | |||
|
|
