SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Front A/B connection
The second set of front speakers can be connected to the FRONT B/ HEIGHT terminals.
In this case, perform the settings using the SPKR A/B button on the remote control or main unit (vpage 27 “Set the front speakers to be used”).
NOTE
When using the A front speakers and B front speakers simultaneously, make sure you check the impedance of the connected speakers (vpage 5).
2.1-channel connection
Connect
Bi-Amp connection
A
In this case, set “Set up “Amp Assign”” (vpage 54) to
Simple version
Basic version
SW
FL(B) FL(A)
FR(A) FR(B)
FL SW FR
q | w | q |
| w | Advanced |
| FL | FR |
|
| version |
| (L) |
| (R) |
| |
|
|
|
|
nnFor connecting two subwoofers
Two subwoofers can be connected to this unit.
The same signal is output from each subwoofer terminal.
For surround playback of a multichannel source, if you connect the center speaker, surround speakers, surround back speakers (or front wide speakers) and subwoofers,
Front speakers can be used separately, depending on the speaker’s specifications or playback source such as front speakers (A) for multichannel playback and front speakers (B) for
When making a
For surround playback of a multichannel source, if you connect the center speaker, surround speakers and subwoofers,
NOTE
•Use speakers compatible with
•When making
Information
For speaker impedance and speaker cable connections, see page 5. | 53 |
| |
|
|