Marantz SR7005 manual Speaker installation/connection Advanced connection, Install

ENGLISH

Speaker installation/connection (Advanced connection)

This section provides the installation, connection, and setup methods of speaker systems other than the 7.1-channel system (with surround back speakers).

For the speaker installation, connection, and setup methods of the 7.1-channel system with surround back speakers, see “Simple version (Simple setup guide)” (vpage 4).

Use Audyssey® Auto Setup function of this unit to automatically detect the number of connected speakers and perform optimal settings for the speakers to be used.

Install

This unit is compatible with Audyssey DSX™ (vpage 111) and Dolby Pro Logic gz (vpage 112), which offers an even wider and deeper surround sensation.

When using Audyssey DSX, install front wide speakers or front height speakers.

When using Dolby Pro Logic gz, install front height speakers.

Install the surround back speakers in a position 2 to 3 ft (60 to 90 cm) higher than ear level.

When 7.1ch (Surround back / Front height / Front wide speaker) installed

FHL			FHR
	FL SW		FR
			C
FWL	3		FWR
	z	2
			5
		z
		1	4z
		z	z

Procedure for speaker settings

Install

Connect (vpage 51)

Front height			Surround
			speaker
speaker
• Point slightly
downwards		Front wide
At least	z1	speaker	2 – 3 ft /
3.3 ft / 1 m		z2
			60 – 90 cm
		45˚
Front
speaker

GViewed from the sideH

Surround back speaker

•Point slightly downwards

SL SR

Listening

position

SBL SBR

z1	22˚	– 30˚	z2	22˚ – 45˚ z3 55˚ – 60˚
z4	90˚	– 110˚	z5	135˚ – 150˚

When 6.1ch (Surround back speaker) installed

Set up speakers (vpage 54)

z1 Recommended for Dolby Pro Logic gz z2 Recommended for Audyssey DSX

NOTE

Sound is not output simultaneously from the surround back speakers, front height speakers, and front wide speakers. You can switch between speakers by changing the settings in surround mode or Audyssey DSX.

FL SW	FR
	C

z2 z1

SL SR

SB

Listening position

z1 22˚ – 30˚ z2 90˚ – 110˚

50