Marantz SR7005 Setting the back light, Using macro operations, Deleting recorded macro operations

ENGLISH

Operating macro function

Using macro operations

[Example] Using the recorded macro operations to button “1”

1 Press the MACRO.

“MACRO” is shown in the MACRO indicator and remote control display.

2 Press the number button (“1”) that you want to use.

Macro operations recorded to number button “1” are performed one at a time.

• The step number shown in the remote control display disappears after the step is performed.

• When all macro operations are completed, the remote control returns to the amp operation mode.

Deleting recorded macro operations

[Example] Deleting the macro operations recorded to button“2”

1 Press and hold MACRO and MENU together until “MACRO” flashes in the LEARN indicator, MACRO indicator and remote control display.

2 Press and hold CLR and the number (“2”) that you want to delete for approximately 3 seconds.

“M2-CL” flashes in the remote control display.

3 Press the ENTER.

The recorded macro operation is deleted, and the remote control returns to step 1.

• To cancel the macro delete operation, press a different button without pressing ENTER.

4 When the macro operation delete is complete, press and hold ENTER until the MACRO indicator switches off.

Adjusting the interval time of macro operations transmitting

The macro operation transmission interval can be adjusted.

• The factory setting is “1 second”.

1 Press and hold MACRO and SOURCE SEL until “SETUP” is shown in the remote control display.

“SETUP” is shown for 3 seconds in the remote control display, after which “MCR05z” is displayed.

z The current transmission interval is shown.

2 Press o p to change to the desired transmission interval.

•The interval time can be changed from 0.5 to 5 seconds by 0.5 seconds step.

3 When the adjustment is complete, press and hold

ENTER until the MACRO indicator switches off.

Setting the back light

Press the Light button on the side of the remote control, and the buttons on the remote control light for 2 seconds. If the Light button is pressed while the buttons are lit, the buttons remain lit for another 2 seconds.

• Backlight is set on in the factory settings.

nnDisabling the backlight

Press and hold both SET and STANDBY untilindicator flashes twice.

nnTurning the backlight on

Press and hold both SET and ON untilindicator flashes twice.

98