| SVENSKA | NEDERLANDS |
|
|
|
Setting items | Setting details |
|
|
| |
GUI | Wall Paper : Set wallpaper to display in the background when playback | |
(Continued) | is stopped, etc. |
|
| • Picture : Set the background to a picture (Marantz logo). | |
| • Black : Set the background to black. |
|
Format : Set the video signal format to be output for the TV you are using.
•NTSC : Select NTSC output.
•PAL : Select PAL output.
“Format” can also be set by the following procedure. However, the menu screen is not displayed.
1. Press and hold the main unit’s
“Video Format” appears on the display.
2. Press o p and set the video signal format.
3.Press the main unit’s ENTER, MENU or RETURN to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture will not be displayed properly.
Text : Display the details of operation when switching surround mode, input mode, etc.
•ON : Turn display on.
•OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
•Bottom : Display at the bottom.
•Top : Display at the top.
•OFF : Turn display off.
When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”.
NET/USB : Set the NET/USB screen display time when the input source is “NET/USB”.
•Always : Show display continuously.
•30sec : Show display for 30 seconds after operation.
•10sec : Show display for 10 seconds after operation.
•OFF : Turn display off.
ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
|
|
|
| Manual Setup |
|
|
|
|
|
Setting items |
|
| Setting details |
|
|
| |||
GUI | TUNER : Set the tuner screen display time when the input source is | |||
(Continued) | “SIRIUS” or “HD Radio”. |
|
|
•Always : Show display continuously.
•30sec : Show display for 30 seconds after operation.
•10sec : Show display for 10 seconds after operation.
•OFF : Turn display off.
| iPod : Set the iPod screen display time when the input source is “NET/ | |
| USB”. | |
| • Always : Show display continuously. | |
| • 30sec : Show display for 30 seconds after operation. | |
| • 10sec : Show display for 10 seconds after operation. | |
| • OFF : Turn display off. | |
Component 2 Output | MAIN ZONE : Use the component 2 output terminal as a monitor output | |
Set whether to use the | for MAIN ZONE. | |
component 2 output | ZONE2 : Use the component 2 output terminal as a monitor output for | |
terminal as MAIN ZONE or | ZONE2. | |
ZONE2. |
| |
Zone Rename | • Up to 10 characters can be input. | |
Change the display title of | • For character input, see page 67. | |
each zone to one you prefer. |
| |
Trigger Out | Trigger Out 1 / Trigger Out 2 | |
Select the condition for | nn When setting for zone (MAIN ZONE / ZONE2 / ZONE3) | |
activating Trigger Out 1/2 for | ||
the input source, surround | Trigger out is activated through linkage to the power of the zone set | |
to “ON”. | ||
mode, etc. | ||
nn When setting for input source | ||
See “DC OUT (TRIGGER | ||
OUT) jacks” (vpage 56) for | Activate trigger out when the input source set to “ON” is selected. | |
| ||
more information on trigger | Active for the zone set to “ON” with “When Setting for Zone”. | |
out. | ||
nn When setting for HDMI monitor | ||
| ||
| Activate trigger out when the HDMI monitor set to “ON” is selected. | |
| Active when the “MAIN ZONE” set to “ON” with “When Setting | |
| for Zone” is selected, and when the input source set to “ON” with | |
| “When Setting for Input Source” is selected. | |
| • ON : Activate trigger on this mode. | |
| • – – | |
| Default : The “Trigger Out” settings are returned to the default settings. | |
| • Yes : Reset to the defaults. | |
| • No : Do not reset to the defaults. |
Simple version
Basic version
Advanced version
Information
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | 87 |
buttons | (Up/Down/Left/Right) |
| ||
|
|
|