ENGLISH
Operating learn function
Delete saved remote control codes
Codes can be erased in three ways: by buttons, sources, and by all memory contents.
nnDelete remote control codes for each button
1 Press and hold down SET and SOURCE SEL until the LEARN indicator blinks.
2 Press input source select buttons to select the input source you want to delete.
The input source is shown in the remote control display.
3 Press and hold down HDMI and press the learned button to be erased twice.
“ERASE” is shown in the remote control display, and the mode returns to learning mode.
• To return the normal mode, press SET.
nnDelete remote control codes for each input source
1 Press and hold down SET and SOURCE SEL until the LEARN indicator blinks.
2 Press and hold down HDMI and press the learned input source select buttons to be erased twice.
“ERASE” is shown in the remote control display.
3 Press ENTER to continue erasing. The indicator blinks twice and the mode returns to LEARN mode.
• To cancel the erasing operation, do not press ENTER, and simply press any other
button.
• To return the normal mode, press SET.
nnDelete remote control codes for all input sources
1 Press and hold down SET and SOURCE SEL until the LEARN indicator blinks.
2 Press and hold down HDMI and press ON and STANDBY .
LEARN indicator lights.
3 Press ENTER to continue erasing. “ERASE” is shown in the remote control display, and the mode returns to learning mode.
• To cancel the erasing operation, do not press ENTER and simply press any other button.
• To return the normal mode, press SET.
NOTE
Erasing codes will return to the factory preset code, or there will leave empty if the button has no factory preset code.
96