Marantz SR7005 manual Sleep timer function, Adjusting the volume of the speakers, English

• In the case of a subwoofer, pressing o when it is at “–12 dB” will change the setting to “OFF”.

• When a headphone jack is inserted, the headphone channel level can be adjusted.

• When the input mode setting is “7.1CH IN”, you can adjust the channel level while the 7.1CH INPUT connector is being used. In that case, “7.1CH IN Level” appears at the top of the screen.

The speaker that can be set switches each time one of the buttons is pressed.

Use ui to select the speaker.

3

4 Use o p to adjust the volume.

Select

Front Rear

Fader

0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB 0.0dB

CHANNEL LEVEL

Front L

Front R

Center Subwoofer Surround L Surround R S.Back L S.Back R

ENGLISH

Convenient functions

Sleep timer function

The power automatically goes into standby once the set time has elapsed.

This is convenient for playing sources while going to sleep.

1 Press AMP to set the remote control unit to amplifier operation mode.

2 Press SLEEP and display the time you want to set.

The indicator on the display lights.

• If SLLEP on the main unit is pressed, the same function as with the remote control unit can be obtained.

•The time switches as shown below each time SLEEP is pressed.

OFF 10 min 20 30 40 50

120 110 100 90 80 70 60

To cancel the sleep timer

Press SLEEP to set “OFF”.

The indicator on the display turns off.

•The sleep timer setting is canceled if this unit’s power is set to standby or turned off.

•When power to the main zone is turned off with the sleep timer, power in ZONE2 and ZONE3 are also turned off.

Adjusting the volume of the speakers

You can adjust the channel level either according to the playback sources or to suit your taste, as described below.

nnAdjusting the volume of the different speakers

1 Press AMP to set the remote control unit to amplifier operation mode.

2 Press CH LVL.

nnAdjusting the volume of groups of speakers (Fader function)

This function lets you adjust (fade) the sound all at once from the front (front speaker / front height speaker / front wide speaker / center speaker) or rear (surround speaker / surround back speaker).

1 Press AMP to set the remote control unit to amplifier operation mode.

2 Press CH LVL.

CHANNEL LEVEL

Front L	0.0dB
Front R	0.0dB
Center	0.0dB
Subwoofer	0.0dB
Surround L	0.0dB
Surround R	0.0dB
S.Back L	0.0dB
S.Back R	0.0dB
Fader	Front	Rear
Select

3 Press i to select “Fader”, then select the item to be adjusting using o p.

4 Use o p to adjust the volume of the speakers. (o : front, p: rear)

•The fader function does not affect the subwoofer.

•The fader can be adjusted until the volume of the speaker is adjusted to the lowest value of –12 dB.

58