ENGLISH
Manual Setup
Setting items | Setting details |
|
|
Network Connecting | r Use i to select “Exit” and press ENTER. |
(Continued) | Setup is complete. |
| • When connecting to the network via a Proxy server, select “Proxy” and |
| press ENTER (vpage 84 “Proxy settings”). |
| • If you are using a broadband router (DHCP function), there is no need |
| to make the settings at “IP Address” and “Proxy”, since the DHCP |
| function is set to “ON” in this unit’s default settings. |
| • If this unit is being used connected to a network without the DHCP |
| function, the network settings must be made. In this case, some |
| knowledge of networks is required. For details, consult a network |
| administrator. |
| • If you cannot connect to the Internet, recheck the connections and |
| settings (vpage 25). |
| • If you do not understand about Internet connection, contact your ISP |
| (Internet Service Provider) or the store from which you purchased your |
| computer. |
| • When you want to cancel the setting during IP address input, press |
| RETURN. |
| Proxy settings : Make this setting when connecting to the Internet via a |
| proxy server. |
Setting items | Setting details |
Network Connecting r Use o p to select the proxy server input method, and then press i.
(Continued)Address : Select when inputting by address. Name : Select when inputting by domain name.
tUse uio p to input the proxy server address or domain name and press ENTER.
When “Address” is selected in step r : Input the address
When“Name” is selected in step r : Input the domain name
• For character input, see page 67.
yUse uio p to input the proxy server port number and press ENTER. u Use i to select “Exit” and press ENTER.
Setup is complete.
Other | Network Standby : Set the network function on/off during standby. |
Network function on/off | • ON : Network is on during standby. Main unit operable with a network |
setting during standby, and | compatible controller. |
PC language setting. | • OFF : Suspend network function during standby. |
| Set to “ON” when using the web control function. |
| PC Language : Select computer environment language. |
| • ara / chi (smpl) / chi (trad) / cze / dan / dut / eng / fin / fre / ger / gre / |
| heb / hun / ita / jpn / kor / nor / pol / por / por(BR) / rus / spa / swe / tur |
| Friendly Name Edit : The Friendly Name is the name of this unit displayed |
| on the network. Up to 63 characters can be input. The default Friendly |
MANUAL SETUP | NETWORK SETUP |
NETWORK CONNECTING |
DHCP | ON |
|
|
IP Address | 192.168.100.19 | ||
Exit |
|
|
|
Detail |
| q |
|
ENTER | Enter | RETURN Return |
Set IP address and proxy manually
MANUAL SETUP | NETWORK SETUP |
NETWORK CONNECTING |
DHCP | ON |
|
|
IP Address | [192.168.100.019] | ||
Subnet Mask | [255.255.255.000] | ||
Default gateway | [000.000.000.000] | ||
Primary DNS | [000.000.000.000] | ||
Secondary DNS | [000.000.000.000] | ||
Proxy |
| w |
|
Exit |
|
|
|
ENTER | Enter | RETURN Return |
Set if using proxy server
Name on first use is “marantz:[SR7005]”. |
• For character input, see page 67. |
Default : Restores Friendly Name, which you had changed, to the default setting.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
When you select “Default” and press ENTER, the “Default Setting?” prompt is displayed. Select either “Yes” or “No”, and press ENTER.
MANUAL SETUP | e |
NETWORK | |
NETWORK CONNECTING |
Proxy |
| ON | |||
Proxy | r | Address | |||
Address |
| [000.000.000.000] |
| ||
y |
| ||||
Port | [00000] |
|
| ||
|
|
|
|
| t |
Exit |
|
| u |
|
|
RETURN Return
Proxy server is used
q On the menu, select “Network Connecting” – “Detail” and press
ENTER.
wUse ui to set “Proxy” and press ENTER.
eUse o p to set “Proxy” to “ON” and press i. The proxy server is enabled.
84
Remote control operation | Move the cursor | Confirm the setting | Return to previous menu | |
buttons | (Up/Down/Left/Right) | |||
|
|