Marantz SR7005 Network Setup, Svenska, Nederlands, Español, Italiano, Français, Deutsch, English

	SVENSKA	NEDERLANDS
Setting items	Setting details
Standby Source	Last : This item is set at the last-used input source.
Sets the HDMI input source	HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respective
to put into standby when	input source into standby.
the power is on.	“Standby Source” can be set when “HDMI Control” is set to “ON”.

ESPAÑOL	ITALIANO	FRANÇAIS	DEUTSCH	ENGLISH
				Manual Setup
Network Setup			Default settings are underlined.
Make network settings.
Setting items			Setting details
Network Connecting	1. Connect the LAN cable (vpage 25 “Connecting to a home network

Simple version

Power Off Control Links the power standby of this unit to external equipment.

All : If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby.

Video : If power to a connected TV is turned off when the input source is BD / DVD / VCR / SAT / GAME / AUX1 / TV, power to this unit is automatically set to standby.

OFF : This unit does not link with power to a TV.

Make settings for wired	(LAN)”).
LAN.	2. Turn on this unit (vpage 7 “Turn on power”).
	This unit performs automatic network setup due to the DHCP function.
	When connecting to a network that has no DHCP function, perform the
	setting in step 3.

3.Set the IP address at the “Network Connecting”.

Basic

“Power Off Control” can be set when “HDMI Control” is set to “ON”.

MANUAL SETUP	NETWORK SETUP
NETWORK CONNECTING

MANUAL SETUP	NETWORKwSETUP
NETWORK CONNECTING

version

Audio Setup	Default settings are underlined.
Make settings for audio playback.
Setting items	Setting details

DHCP	ON
IP Address	192.168.100.19
Exit
Detail		q
ENTER	Enter	RETURN Return

Set IP address and proxy manually

DHCP	OFF
IP Address	[192.168.100.019]
Subnet Mask	[255.255.255.000]
Default Gateway	[000.000.000.000]
Primary DNS	[000.000.000.000]
Secondary DNS	[000.000.000.000]
Proxy
Exit		r	e
		RETURN Return

Set IP address manually

7.1ch IN SW Level	Subwoofer Level : Set playback level of subwoofer signal input from the
Setup playback method for	7.1CH INPUT connector.
analog signals inputted from	• +10dB : This is the recommended level.
7.1CH INPUT connectors.	• +15dB / +5dB / 0dB : Select the level according to the player being used.
EQ Customize	Audyssey Byp. L/R : Set when not using “Audyssey Byp. L/R” equalizer.
Set so that unused equalizer	• Used : Use.
settings are not displayed	• Not Used : Do not use.
when MULTEQ is pressed.	Set so that “Audyssey Byp. L/R” settings can be made when

Audyssey® Auto Setup is performed.

Audyssey Flat : Set when not using “Audyssey Flat” equalizer.

• Used : Use.

• Not Used : Do not use.

Set so that “Audyssey Flat” settings can be made when Audyssey Auto Setup is performed.

Manual : Set when not using the “Manual” equalizer.

•Used : Use.

•Not Used : Do not use.

qOn the menu, select “Network Connecting” – “Detail” and press

ENTER.

wUse o p to set “DHCP” to “OFF”, then press i. The DHCP function is disabled.

eUse uip to input the address and press ENTER.

•IP Address : Set the IP address within the ranges shown below. The Network Audio function cannot be used if other IP addresses are set.

CLASS A: 10.0.0.0 – 10.255.255.255

CLASS B: 172.16.0.0 – 172.31.255.255

CLASS C: 192.168.0.0 – 192.168.255.255

•Subnet Mask : When connecting an xDSL modem or terminal adapter directly to this unit, input the subnet mask indicated in the documentation supplied by your provider. Normally input 255.255.255.0.

•Default Gateway : When connected to a gateway (router), input its IP address.

•Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation supplied by your provider, input it at “Primary DNS”. If there are two or more DNS addresses, input the first one at “Secondary DNS”.

Advanced version

Information

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu	83
buttons	(Up/Down/Left/Right)