ENGLISH
Connections
Important information
• Make connections as follows before using this unit. Select an appropriate connection type |
according to the components to be connected. |
GFlow of video signals for ZONE2H
• You may need to make some settings on this unit depending on the connection method. Refer to |
each description for more information. |
• Select the cables (sold separately) according to the components being connected. |
NOTE
• Do not plug in the power cord until all connections have been completed. |
• When making connections, also refer to the operating instructions of the other components being |
connected. |
• Be sure to connect the left and right channels properly (left with left, right with right). |
Video device
Input
Output(IN)
This unit | Monitor |
| |
Output |
|
(MONITOR OUT) | Input |
• Do not bundle power cords together with connection cables. Doing so can result in noise. |
Converting input video signals for output (Video conversion function)
This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video).
Use the connectors corresponding to the components to be connected.
This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor.
Component video | Component video | Component video | Component video |
connectors | connectors | connectors (OUT2/ZONE2) | connectors |
Video connector | Video connector | Video connector | Video connector |
in Set as Necessary
•Set when not using the video conversion function. “Video Convert” (vpage 72)
•Set when changing the resolution of the video signal. “Resolution” (vpage 72)
GFlow of video signals for MAIN ZONEH
Video device
Input
Output(IN)
This unit
| Monitor |
Output |
|
(MONITOR OUT) | Input |
•The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43,
•The resolution of the video signal input to this unit’s HDMI connector is the one set at “Resolution” (vpage 72). (1080p HDMI signals and 1080p component signals are output at 1080p, regardless of the setting.)
•Resolutions of
HDMI connector | HDMI connector | HDMI connector | HDMI connector |
Component video | Component video | Component video | Component video |
connectors | connectors | connectors | connectors |
Video connector | Video connector | Video connector | Video connector |
NOTE
•HDMI signals cannot be converted into analog signals.
•When a
•Component video input signals cannot be converted into Video format.
•A menu is output via the HDMI connector or component video connector.
•When using component output terminal 2 for ZONE2 video signal output, set “Input Setup” – “Input Assign” – “Component” (vpage 71) in the menu to “ZONE2”.
14