SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
Display
Main Display |
| Sub Display |
Q6 | Q5 | Q4Q3Q2 | Q1 Q0 | o | i u | |
q | w |
| e |
|
| rty |
Simple version
Basic version
q w e
qLight illumination
When the power to this device is switched on, the surrounding area is lit blue. The settings can be changed so the light does not switch on (vpage 91 “Switches light illumination on/off”).
wMaster volume indicator eInput source indicator
The currently selected input source name is displayed.
If the input source name has been changed using “Input Setup” – “Rename” (vpage 73) in the menu, the input source name after the change is displayed.
qInput signal indicators |
|
wInput signal channel indicators |
|
These light when digital signals are input. |
|
When playing HD Audio sources, the | indicator lights when a |
signal from an extension channel (a channel other than the front,
center, surround, surround back or LFE channel) is input. |
|
If there are two or more extension channels, the | and |
indicators light. |
|
eInformation display
The input source name, surround mode, setting values and other information are displayed here.
rFront height/front wide channel indicators
When audio is output from the front height channels, the “H” indicator lights. When audio is output from the front wide channels, the “W” indicator lights.
tFront speaker indicator
This lights according to the setting of the front A and B speakers.
yMonitor output indicator
These light according to the HDMI monitor output setting. uMaster volume indicator
iMUTE indicator
This lights when the mute mode is select (vpage 27).
oAUDYSSEY indicators
Lighting is as follows, depending on the setting of “Dynamic EQ®” (vpage 76) and “Dynamic Volume®” (vpage 77).
When “Dynamic EQ” and “Dynamic Volume” are
“ON”.
When “Dynamic EQ” is “ON” and “Dynamic Volume” is “OFF”.
Q0Sleep timer indicator
This lights when the sleep mode is selected (vpage 58).
This lights up when ZONE2, ZONE3 (separate room) power is turned on (vpage 64).
Q2Input mode indicators
Set the audio input modes for the different input sources (vpage 73).
Q3HDMI indicator
This lights when playing using HDMI connections.
Q4Tuner reception mode indicators
These light according to the reception conditions when the input source is set to “HD Radio”.
STEREO : In the FM mode, this light when receiving stereo broadcasts.
TUNED : Lights when the broadcast is properly tuned in.
AUTO : This light when in the auto tuning mode.
Q5Decoder indicators
These light when the respective decoders are operating.
Q6HD indicator
This light during HD Radio reception.
Advanced version
Information
When “Dynamic EQ” and “Dynamic Volume” are “OFF”.
101