Marantz SR7005 manual Speaker Setup, Setting items Setting details Amp Assign

ENGLISH

Manual Setup

Speaker Setup Default settings are underlined.

Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.

•If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ XT, Dynamic EQ and Dynamic Volume (vpage 76, 77).

•Manual Setup can be used without changing the settings. Please set if necessary.

Setting items	Setting details
Amp Assign	Normal : Set when using surround back, front height or front wide
Set the speakers connected	speakers.
to this unit.	ZONE2 : Set for connecting the speakers for ZONE2 to the SURR.BACK/
	AMP ASSIGN terminals.
	ZONE3 : Set for connecting the speakers for ZONE3 to the SURR.BACK/
	AMP ASSIGN terminals.
	SPKR-C : Set for connecting a tweeter of a front speaker to the SURR.
	BACK/AMP ASSIGN terminals and a woofer of a front speaker to the
	FRONT terminals.

Setting items	Setting details
Speaker Config.	Surround : Set the presence and size of the surround speakers.
(Continued)	• Large : Use a large speaker that can adequately play back low
	frequencies.
	• Small : Use a small speaker that has inadequate playback capacity for
	low frequencies.
	• None : Select when the surround speakers are not connected.
	• When “Surround” is set to “Large”, “S.Back”, “F.Height” and “F.Wide”
	can be set to “Large”.
	• When “Surround” is set to “None”, “S.Back”, “F.Height” and “F.Wide”
	can automatically set to “None”.

S.Back : Set the presence, size and number of surround back speakers.

• Large : Use a large speaker that can adequately play back low

frequencies.

• Small : Use a small speaker that has inadequate playback capacity for

Speaker Config.

Select speaker configuration and size (bass reproduction capability).

NOTE

Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossover Frequency” (vpage 82) as the standard for determining bass reproduction capability.

Front : Set the front speaker size.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.

•When “Front” is set to “Small”, “Center”, “Surround“, “S.Back”, “F.Height” and “F.Wide” can not be set to “Large”.

Center : Set the presence and size of the center speaker.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when a center speaker is not connected.

“Large” is not displayed when “Front” is set to “Small”.

Subwoofer : Set the presence of a subwoofer.

•Yes : Use a subwoofer.

•No : Select when a subwoofer is not connected.

When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”.

low frequencies.

• None : Select when the surround back speakers are not connected.

• 2spkrs : Use two surround back speakers.

• 1spkr : Use only one surround back speaker. When you select this

setting, connect the surround back speaker to the left (L) channel.

Even when the “S.Back“ setting is other than “None”, sound may not be emitted from the surround back speaker, depending on the playback source.

NOTE

When “Amp Assign” setting (vpage 80) is other than “Normal”, you cannot make the “S.Back” setting.

F.Height : Set the presence and size of the front height speakers.

•Large : Use a large speaker that can adequately play back low frequencies.

•Small : Use a small speaker that has inadequate playback capacity for low frequencies.

•None : Select when the front height speakers are not connected.

NOTE

When “Amp Assign” setting (vpage 80) is other than “Normal”, you cannot make the “F.Height” setting.

80

Remote control operation	Move the cursor	Confirm the setting	Return to previous menu
buttons	(Up/Down/Left/Right)