ENGLISH
Specifications
nn Audio section
• Power amplifier |
|
|
Rated output: | Front: |
|
| 125 | W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| Center: | |
| 125 | W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| Surround: | |
| 125 | W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
| Surround back / Front height / Front wide: | |
| 125 | W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) |
Maximum effective output power: | Front: |
|
| 195 | W + 195 W (6 Ω, 1 kHz with 10 % T.H.D.) |
| Center: | |
| 195 | W (6 Ω, 1 kHz with 10 % T.H.D.) |
| Surround: | |
| 195 | W + 195 W (6 Ω, 1 kHz with 10 % T.H.D.) |
| Surround back / Front height / Front wide: | |
| 195 | W + 195 W (6 Ω, 1 kHz with 10 % T.H.D.) |
Output connectors: | 6 – 8 Ω | |
• Analog |
|
|
Input sensitivity/Input impedance: | 200 mV/47 kΩ | |
Frequency response: | 10 Hz – 100 kHz — +1, | |
S/N: | 96 dB | |
Distortion: | 0.008 % (20 Hz ~ 20 kHz) (DIRECT mode) | |
Rated output: | 1.2 V |
|
• Digital |
|
|
D/A output: | Rated output — 2 V (at 0 dB playback) | |
| Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) | |
| S/N ratio — 102 dB | |
| Dynamic range — 100 dB | |
Digital input: | Format — Digital audio interface | |
nn Tuner section |
| [FM] | [AM] |
| (Note: μV at 75 Ω, 0 dBf = 1 x |
| |
Receiving Range: | 87.5 MHz – 107.9 MHz | 530 kHz – 1710 kHz | |
Usable Sensitivity: | 1.5 μV (14.8 dBf) | 18 μV | |
S/N | MONO | 78 dB |
|
| STEREO | 68 dB |
|
| HD | 85 dB | 85 dB |
Total harmonic Distortion (at 1 kHz): | MONO | 0.1 % |
|
| STEREO | 0.1 % |
|
nn General | HD | 0.02 % | 0.02 % |
|
|
| |
Power supply: | AC 120 V, 60 Hz |
| |
Power consumption: | 700 W |
|
|
| 0.2 W (Standby) |
| |
| 4.0 W (CEC standby) |
| |
Maximum external dimensions: | 440 (W) x 187 (H) x 406 (D) mm |
| |
Weight: | 13.0 kg |
|
|
nn Remote control unit (RC011SR) |
|
|
|
Batteries: | R03/AAA Type (two batteries) |
| |
For purposes of improvement, specifications and design are subject to change without notice.
•Phono equalizer (PHONO input — REC OUT)
Input sensitivity: | 2.5 mV |
RIAA deviation: | ±1 dB (20 Hz to 20 kHz) |
S/N: | 74 dB (A weighting, with 5 mV input) |
Rated output: | 150 mV |
Distortion factor: | 0.03 % (1 kHz, 3 V) |
nn Video section
• Standard video connectors |
|
Input/output level and impedance: | 1 |
Frequency response: | 5 Hz – 10 MHz — +1, |
• Color component video connector |
|
Input/output level and impedance: | Y (brightness) signal — 1 |
| PB / CB signal — 0.7 |
| PR / CR signal — 0.7 |
Frequency response: | 5 Hz – 60 MHz — +0, |
118
