SVENSKA | NEDERLANDS | ESPAÑOL | ITALIANO | FRANÇAIS | DEUTSCH | ENGLISH |
Adjusting the master volume
Use VOLUME to adjust the volume.
nn When the “Volume Display” setting (vpage 86) is “Relative”
GAdjustable rangeH
– – –
nn When the “Volume Display” setting (vpage 86) is “Absolute”
GAdjustable rangeH 0.0 – 99.0
•The adjustable range may vary depending on input signal and channel level settings.
You can also operate via the main unit. In this case, perform the following
operations. Turn VOLUME to adjust the volume.
Important information
Set the front speakers to be used
Press SPKR A/B.
• Each time you press SPKR A/B, the front speaker setting will change as follows.
Front A Front B Front A+B
Playing a Blu-ray Disc player/DVD player
The following describes the procedure for playing
1
2
3 Press BD or DVD twice to switch the input source for the player used for playback.
4 Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles setting, etc.) beforehand.
Simple version
Basic version
Advanced
Turning off the sound temporarily
Press MUTE.
•The sound is reduced to the level set at “Mute Level” (vpage 86).
•To cancel, press MUTE again. Muting can also be canceled by adjusting the master volume.
Playing a CD player
The following describes the procedure for playing CD player.
1 Prepare for playback.
q Turn on the power of the subwoofer and player.
w Load the disc in the player.
2 Pressunit. ON to turn on power to the
3 Press CD twice to switch the input source to the CD player.
4
version
Information
27