Manuals / Dixon / Lawn and Garden / Lawn Mower

Dixon 1950-2300 Series manual Specifications, Model ZTR 1950 and

Models: 1950-2300 Series

1 52

Download 52 pages 52.7 Kb

Page 14

	SPECIFICATIONS
	Model ZTR 1950 and 2300
CHASSIS:	11 GA - rectangular tube
SEAT:	Designed for operator comfort by use of high-density closed cell foam
	padded back and arm rests, upholstered with CorduraTM water-
	repellent fabric. Seat is adjustable fore and aft. Mounted on operator
	suspension system.
MOWER DECK:	Two decks are available. The 60” is made of stamped steel. The 50”
	is made of 11 GA fabricated welded construction with external
	reinforcement ribs. Three blades combine for a 50” or 60” cut width.
	Cut height approximately 1.5” to 5” via 8 position lift handle.
BLADE DRIVE:	Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a HydroGear BDP 10A
	pump and a White CE 14 hydraulic motor.
ENGINE:
Model 1950:	19HP Kawasaki , overhead valves, replaceable oil filter, full pressure
	lube system, dual element air cleaner, integral fuel pump.
Model 2300:	23 HP Kohler Command, 4-cycle, V-Configuration, Overhed Valve, Air-
	Cooled, Gasoline, Vertical Shaft, Aluminum Head and Crankcase with
	Cast Iron Liners, Full Pressure Lubrication/Full Flow Filter, Pulse Type
	Fuel Pump, Fixed Jet Carburetor w/Smart-Choke, Electronic Ignition,
	In-line Fuel Filter, Dual Element Air Cleaner.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks on parking brake
	and blade drive clutch.
TIRES:	Front	11 X 4 X 5 ribbed tread (16-21 lbs)
	Rear	20 X 10 X 8 Turf Master (8-14 lbs)
CAPACITIES:	Fuel - 11 gallon (approximately)
	Hydrostat Oil tank - 4 quart with in-line 40 micron filter
	Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS:	Width	60” (50” Deck), 72” (60” Deck)
	Height	46.5”
	Length	75”
	Weight	737 lbs, (50” Deck], 770 lbs (60” Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

14

Image 14

Dixon 1950-2300 Series manual Specifications, Model ZTR 1950 and

Contents

1950-2300 Series Model YearIMPORTANT - READ CAREFULLY Standard Service Parts List 1950/2300 Series Page Safety Warranty Policy SpecificationsControls Operation Instructions Care & Maintenance Troubleshooting INDEXCAN CAUSE SERIOUS INJURY OR DEATH SAFETYRIDING LAWN MOWERS IF IMPROPERLY OPERATED BLADE CONTACT TIP OVER RUN OVER BACK OVERSAFETY Follow recommended safety precautions and safe operating practicesSafety Alert Symbol When you see this symbol BE ALERT to the potential for injuryGENERAL OPERATION SAFETYGENERAL OPERATION continued SAFETYSLOPE OPERATION SAFETYDO NOT SLOPE OPERATION continuedDO continued SAFETYSERVICE SAFETYSERVICE continued SAFETYTragic accidents can occur if the operator is NEVER assume children will stay where they were last seenCHILDREN not alert to the presence of childrenDIXON LIMITED WARRANTY POLICY Pro Models 1950 ~ 2300 ~ SPECIFICATIONS Model ZTR 1950 and2. Slide seat forward or backward 3. Release seat slide adjuster SEAT ADJUSTMENT INSTRUCTIONS1. Grasp seat slide adjuster and move it into adjustment position Models 1950Note The pressure required to operate the mower is very light CONTROLSCONTROL LEVERS CONTROLS CHOKE CONTROL LEVERTHROTTLE CONTROL LEVER TO SET PARKING BRAKE PARKING BRAKEHYDRO GEAR SYSTEM CONTROLSMOWER DECK CUT HEIGHT LIFT LEVER BLADE DRIVECIRCUIT BREAKER NOTE Always use high position for transportOPERATION INSTRUCTIONS TOWINGBEFORE OPERATING MOWER OPERATION INSTRUCTIONSTO FREE WHEEL MACHINE UNLOCK TRANSMISSION OPERATION INSTRUCTIONSOPERATION INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMSENGINE SHOULD STOP OPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS5. Maintain Sharp Blades Throughout The Cutting Season GRASS HEIGHT AND CUTTING SUGGESTIONS OPERATION INSTRUCTIONSSTARTING INSTRUCTIONS cold engine OPERATION INSTRUCTIONSSTARTING INSTRUCTIONS engine has been operated OPERATION INSTRUCTIONSMOWING WITH A MULCHING ATTACHMENT OPERATION INSTRUCTIONSOPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT continued6. CUT HIGH - MOW OFTEN OPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT6. Maintain Sharp Blades Throughout The Cutting Season MOWING WITH A GRASS CATCHER ATTACHMENT continued OPERATION INSTRUCTIONSDECK ROLLERS 60” deck OPERATION INSTRUCTIONSBefore performing any maintenance, turn off engine CARE AND MAINTENANCEMAINTENANCE SCHEDULE allow to cool & remove key Use extreme care when working on machineryTIRES BATTERYENGINE CARE AND MAINTENANCECUTTER BLADE MAINTENANCE CARE AND MAINTENANCEEngine to Mower Deck Belt BELTSBELT TENSION P/N 6111 50”CARE AND MAINTENANCE FUEL SHUT OFF VALVELUBRICATION CHANGING THE ENGINE OIL CARE AND MAINTENANCE3. The use of any other oil filter may cause damage to the engine OIL FILLOIL FILTERS CARE AND MAINTENANCERECOMMENDED OIL WEIGHT HYDROSTATIC TRANSMISSION OIL & FILTER SERVICESERVICE INTERVALS Dirt or water in oil can ruin the hydrostatic transmissionsprotect your environment HYDROSTAT OIL MAINTENANCE PROCEDUREPlease dispose of used oil at proper collection centers CARE AND MAINTENANCEPARTS/SERVICE CLEANING THE MOWERWARRANTY ELECTRICAL SYSTEMSMOWER DECK REMOVAL CARE AND MAINTENANCEMOWER DECK LEVELING PROCEDURE CARE AND MAINTENANCEMOWER DECK LEVELING PROCEDURE continued CARE AND MAINTENANCECARE AND MAINTENANCE STEERING CONTROL ADJUSTMENTSTo adjust neutral CARE AND MAINTENANCE STEERING CONTROL ADJUSTMENTS continuedTo adjust neutral springs 2. ENGINE WILL TURN OVER BUT WON’T START TROUBLESHOOTING1. ENGINE WON’T TURN OVER 3. HARD TO START ENGINE6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARD 7. MOWER LOSES POWER OR TRANSMISSION OVERHEATS8. ENGINE STALLS WHEN BLADES ARE ENGAGED 9. DRIVE SYSTEM60” Deck STANDARD SERVICE PARTS LIST50” Deck Mower Model Number OWNER INFORMATIONDate Purchased Purchased Fromdefects or other reproductive harm ZTRMowersDixon and ZTR are registered trademarks of Dixon Industries, Inc