Electrical Specifications

Notes:

1.For functional operation, all processor electrical, signal quality, mechanical, and thermal specifications must be satisfied.

2.Overshoot and undershoot voltage guidelines for input, output, and I/O signals are outlined in

Section 7.9.5. Excessive overshoot or undershoot on any signal will likely result in permanent damage to the processor.

7.7.1Storage Conditions Specifications

Environmental storage condition limits define the temperature and relative humidity limits to which the device is exposed to while being stored in a Moisture Barrier Bag. The specified storage conditions are for component level prior to board attach (see notes in Table 7-10for post board attach limits).

Table 7-10specifies absolute maximum and minimum storage temperature limits which represent the maximum or minimum device condition beyond which damage, latent or otherwise, may occur. The table also specifies sustained storage temperature, relative humidity, and time-duration limits. These limits specify the maximum or minimum device storage conditions for a sustained period of time. At conditions outside sustained limits, but within absolute maximum and minimum ratings, quality & reliability may be affected.

Table 7-10. Storage Condition Ratings

Symbol

Parameter

Min

Max

Unit

 

 

 

 

 

Tabsolute storage

The minimum/maximum device storage temperature

-25

125

°C

 

beyond which damage (latent or otherwise) may

 

 

 

 

occur when subjected to for any length of time.

 

 

 

 

 

 

 

 

Tsustained storage

The minimum/maximum device storage temperature

-5

40

°C

 

for a sustained period of time.

 

 

 

 

 

 

 

 

Tshort term storage

The ambient storage temperature (in shipping media)

-20

85

°C

 

for a short period of time.

 

 

 

 

 

 

 

 

RHsustained storage

The maximum device storage relative humidity for a

60% @ 24

°C

 

sustained period of time.

 

 

 

 

 

 

 

 

Timesustained storage

A prolonged or extended period of time; typically

0

30

months

 

associated with sustained storage conditions

 

 

 

 

Unopened bag, includes 6 months storage time by

 

 

 

 

customer.

 

 

 

 

 

 

 

 

Timeshort term storage

A short period of time (in shipping media).

0

72

hours

Notes:

1.Storage conditions are applicable to storage environments only. In this scenario, the processor must not receive a clock, and no lands can be connected to a voltage bias. Storage within these limits will not affect the long-term reliability of the device. For functional operation, please refer to the processor case temperature specifications.

2.These ratings apply to the Intel component and do not include the tray or packaging.

3.Failure to adhere to this specification can affect the long-term reliability of the processor.

4.Non-operating storage limits post board attach: Storage condition limits for the component once attached to the application board are not specified. Intel does not conduct component level certification assessments post board attach given the multitude of attach methods, socket types and board types used by customers. Provided as general guidance only, Intel board products are specified and certified to meet the following temperature and humidity limits (Non-Operating Temperature Limit: -40°C to 70°C & Humidity: 50% to 90%, non condensing with a maximum wet bulb of 28°C).

5.Device storage temperature qualification methods follow JEDEC High and Low Temperature Storage Life Standards: JESD22-A119(low temperature) and JESD22-A103(high temperature).

Intel® Xeon® Processor E5-1600/E5-2600/E5-4600 Product Families

167

Datasheet Volume One

 

Page 167
Image 167
Intel E5-1600, CM8062101038606, E5-4600, E5-2600 manual Storage Conditions Specifications, Storage Condition Ratings