Intel® Xeon® Processor E5-1600/E5-2600/E5-4600 Product Families 119
Datasheet Volume One
Thermal Management Specifications
5.1.3.7 8-Core 70W Thermal Specifications
Notes:
1. These values are specified at VCC_MAX for all processor frequencies. Systems must be designed to ensure
the processor is not to be subjected to any static VCC and ICC combination wherein VCC exceeds VCC_MAX at
specified ICC. Please refer to the electrical loadline specifications in Section 7.8.1.
2. Thermal Design Power (TDP) should be used for processor thermal solution design targets. TDP is not the
maximum power that the processor can dissipate. TDP is measured at maximum TCASE.
3. These specifications are based on final silicon characterization.
4. Power specifications are defined at all VIDs found in Table 7 -3. The processor may be delivered under
multiple VIDs for each frequency.
5. FMB, or Flexible Motherboard, guidelines provide a design target for meeting all planned processor
frequency requirements.
Notes:
1. Please refer to Table 5 -15 for discrete points that constitute the thermal profile.
2. Implementation of this Thermal Profile should result in virtually no TCC activation. Refer to the Intel®
Xeon® Processor E5-1600/E5-2600/E5-4600 Product Families Thermal/Mechanical Design Guide for
system and environmental implementation details.
85 70.8 80.6 81.5
90 71.9 82.3 83.3
95 73.0 83.9 85.0

Table 5-14. Tcase: 8-Core 70W Thermal Specifications 1U

Core
Frequency Thermal Design
Power (W) Minimum
TCASE (°C) Maximum
TCASE (°C) Notes
Launch to FMB 70 5 See Figure5-15 and Ta ble 5- 15 1, 2, 3, 4, 5

Table 5-13. 8/6-Core 95W Thermal Profile Table 1U (Sheet 2 of 2)

Power (W) Maximum TCASE (°C) Maximum DTS (°C)
8/6-core 8-core 6-core

Figure 5-15. Tcase: 8-Core 70W Thermal Profile 1U