Samsung ML-1710P manual Problem, Possible Cause, Solution, The printer driver may

Problem	Possible Cause	Solution
The printer	The printer driver may	Reinstall the printer driver; see
does not print.	be incorrectly	page 2.18. Try printing a demo page.
(continued)	installed.
	The printer is	Check the LEDs on the control panel to
	malfunctioning.	determine if the printer is indicating a
		system error.
Printer selects	The paper source	For many software applications, the paper
materials from	selection in the printer	source selection is found under the Paper
the wrong	properties may be	tab within the printer properties. Select
paper source.	incorrect.	the correct paper source. See page 4.6.
Paper does not	Paper has not been	Remove paper from the tray and reload it
feed into the	loaded correctly.	correctly.
printer.
	There is too much	Remove excess paper from the tray.
	paper in the tray.
	The paper is too thick.	Use only paper that meets the
		specifications required by the printer.
Print job is	The job may be very	Reduce the complexity of the page or try
extremely	complex.	adjusting the print quality settings.
slow.		The maximum print speed of the printer
		is 16(A4) or 17(Letter) pages per minute.
	If using Windows 9x/	From the Start menu, choose Settings
	Me, the Spooling	and Printers. Right-click the Samsung
	Setting may be set	ML-1710 Serise printer icon, choose
	incorrectly.	Properties, click the Details tab, and
		then choose the Spool Settings button.
		Select the desired spool setting.
Half the page	The page layout is too	Simplify the page layout and remove any
is blank.	complex.	unnecessary graphics from the document.
	The page orientation	Change the page orientation in your
	setting may be	application.
	incorrect.
	The paper size and	Ensure that the paper size in the print
	the paper size settings	settings matches the paper in the tray.
	do not match.

6.4 SOLVING PROBLEMS