Teledyne 3190Z Specifications, Trace Oxygen Analyzer Appendix, Range ID 0-10 VDC

Trace Oxygen Analyzer Appendix

Appendix

A.1 Specifications

Ranges: Two user selectable ranges can be set between 0-10 ppm and 0-1,000 ppm oxygen. Default ranges are 0-100 ppm and 0-1,000 ppm oxygen

Signal Output: Voltage: 0–10 VDC, negative ground Current: 4-20 mA, negative ground

Range ID: 0-10 VDC

Display: Light-emitting diode (LED) display

Alarms: One high alarm relay, adjustable; one low alarm relay, adjustable; one sensor failure relay. All alarms failsafe.

System Operating Temp: 0 - 50°C

Accuracy: ±2% of full scale at constant temperature ±5% of full scale over 0-50°C range once temperature equilibrium is reached (at 3% and 5% user defined ranges).

Response Time: 90% in less than 20 seconds at 25°C

System Power: AC (100-240 VAC, 47/440 Hz), or DC

Requirements: (10-36 VDC); user specified

System Enclosure: Panel Mount: 2.81" H × 6.0" W × 2.87" D (71.4 mm × 152.4 mm × 72.9 mm).

Face Plate: 3.75" H × 7.0" W (95.3 mm H × 177.8 mm W). Faceplate rated to NEMA-4

Sensor Type: Zirconium Oxide

Analysis Unit: 4.0" H × 6.0" W × 3.25" D (101.6 mm × 152.4 mm × 82.6 mm)

Teledyne Analytical Instruments 25