Intel CM8062101038606 Serial VID Interface Svid DC Specifications Sheet 2, CMOS1.05v Signals

Table 7-21. Serial VID Interface (SVID) DC Specifications (Sheet 2 of 2)

Symbol	Parameter	Min	Typ	Max	Units	Notes
RON	Buffer On Resistance			14	Ω	2
	Signals SVIDCLK, SVIDDATA
IIL	Input Leakage Current			±900	μA	3,4
	Signals SVIDCLK, SVIDDATA
IIL	Input Leakage Current			±500	μA	3,4
	Signal SVIDALERT_N

Notes:

1.VTT refers to instantaneous VTT.

2.Measured at 0.31*VTT

3.Vin between 0V and VTT

4.Refer to the appropriate Platform Design Guide (PDG) for routing design guidelines.

Table 7-22. Processor Asynchronous Sideband DC Specifications

Symbol	Parameter	Min	Max	Units	Notes
	Input Edge Rate	0.05		V/ns	4,5
	Signals: CAT_ERR_N, MEM_HOT_C{01/23}_N,
	PMSYNC, PROCHOT_N, PWRGOOD, RESET_N
CMOS1.05v Signals
VIL_CMOS1.05v	Input Low Voltage		0.3*VTT	V	1,2
VIH_CMOS1.05v	Input High Voltage	0.7*VTT		V	1,2
VIL_MAX	Input Low Voltage		0.320	V	1,2,5,
	Signal PWRGOOD
VIH_MIN	Input High Voltage	0.640		V	1,2,5
	Signal PWRGOOD
VOL_CMOS1.05v	Output Low Voltage		0.12*VTT	V	1,2
VOH_CMOS1.05v	Output High Voltage	0.88*VTT		V	1,2
IIL_CMOS1.05v	Input Leakage Current		±50	mA	1,2
IO_CMOS1.05v	Output Current		±1.50	mA	1,2
	(RTEST = 500 ohm)
ANM_Rise	Non-Monotonicity Amplitude, Rising Edge		0.135	V	5
	Signal PWRGOOD
ANM_Fall	Non-Monotonicity Amplitude, Falling Edge		0.165	V	5
	Signal PWRGOOD
Open Drain CMOS (ODCMOS) Signals
VIL_ODCMOS	Input Low Voltage		0.3*VTT	V	1,2
VIH_ODCMOS	Input High Voltage	0.7*VTT		V	1,2
VOH_ODCMOS	Output High Voltage		VTT(max)	V	1,2
	Signals: CAT_ERR_N, ERROR_N[2:0],
	THERMTRIP_N, PROCHOT_N, CPU_ONLY_RESET
IOL	Output Leakage Current,		±100	mA	3
	Signal MEM_HOT_C{01/23}_N
IOL	Output Leakage Current		±900	mA	3
	(RTEST = 50 ohm)
RON	Buffer On Resistance
	Signals: CAT_ERR_N, CPU_ONLY_RESET,		14	W	1,2
	ERROR_N[2:0], MEM_HOT_C{01/23}_N,
	PROCHOT_N, THERMTRIP_N
Notes:
180	Intel® Xeon® Processor E5-1600/E5-2600/E5-4600 Product Families
				Datasheet Volume One