OPERATION INSTRUCTIONS | |
DECK ROLLERS (60” deck): | |
Purpose: | The spring loaded deck rollers located at the |
| front corners of the 60” mower deck are |
| designed as an aid to limit turf scalping when |
| mowing on uneven ground. |
Height: | Normal height settings as installed at the |
| factory allows each roller to ride slightly above |
| the turf. This setting should prove ideal under |
| most mowing conditions. |
Adjustment: | Some mowing applications may require |
| lowering of each front roller. To lower the |
| roller, remove the pin, spring, washers and |
| spacer (P/N 9789) from the top of roller |
| bracket tube. Remove roller bracket from |
| tube. Slide spacer P/N 9789 on roller |
| bracket shaft and reassemble using washer, |
| spring and pin at the top. |
Lubrication: | The use of a penetrating oil or light grease on |
| the roller bracket shafts will keep roller moving |
| freely. |
32
