Clover Electronics HDC100 Specifications, LIMITED 2 YEAR WARRANTY, How To Obtain Factory Service

	too strong light, change the position
The image on the screen flickers	Does the camera face to directly to the
	sunlight or fluorescent light? Change the
	camera position
Picture rolls and jumps, scrambled	Improper V-hold control. Setting on your
picture	monitor
Picture smaller than screen	House current may be too low

SPECIFICATIONS

•	Image sensor	1/3” Sony Super HAD CCD, 768H x 494V
•	Scanning system	525 lines, 2:1 interlace
•	Horizontal resolution	520 TV lines
•	Shutter speed	Auto, Manual (1/60 to 1/100,000 sec)
•	Sync. System	Internal
•	S/N ratio	more than 46db (AGC off)
•	Minimum illumination	0.1 Lux with LEDs- Off
•	Video output	Composite 1.0Vp-p @75 Ω
•	AGC	Auto
•	White balance	Auto
•	Lens	6mm fixed lens
•	Current consumption	450mA Max
•	Power supply	DC 15V, 1.5A
•	Operating temperature	-10°C to 50°C
•	Dimensions	140 (W) x 111 (H) x 140 (D) mm
•	Weight	2.8 Lbs

LIMITED 2 YEAR WARRANTY

This warranty gives the original purchaser specific legal rights and you may also have other rights, which vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair free of charges for 2 years on parts and labor from the date of original purchase. This warranty does not cover modification, abuse, incidental or consequential damages unless the state of owner’s residence specially prohibits limitations on incidental or consequential damages.

HOW TO OBTAIN FACTORY SERVICE

1.Original purchaser must fill out a warranty card and mail it to the factory with model number, serial number and the date of purchase.