Pioneer DVR-630H-S, DVR-530H-S manual Playing CDs and WMA/MP3 discs, Playing Video CD/Super VCDs

Getting started 04

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs1, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

PREV NEXT Press to skip to previous/next track (or folder for WMA/MP3 disc). (During play- back you can also use the front panel +/– buttons.)

During playback, enter a track number then press ENTER to skip directly to that track.

Press CLEAR to clear a number entry and

CLEAR

CLEAR	start again.
ENTER

Playing Video CD/Super VCDs

The table below shows the basic playback controls for Video CD/Super VCDs.

Some discs feature Playback Control (PBC for short) menus. These discs show PBC in the display when you load them and display a menu on-screen from where you

can select what to watch.2

PLAY Press to start playback.

Video CD only: If RESUME is displayed on- screen, playback starts from the place last stopped.

STOP Press to stop playback.

Video CD only: You can resume playback from the same point by pressing PLAY. (Press STOP again to cancel the resume function.)

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN Press to start scanning. Press repeatedly to increase the scanning speed.

		Press to skip to previous/next track.
PREV	NEXT
		When a PBC menu is displayed, press to
		display the previous/next page. (During
		playback you can also use the front panel
		+/– buttons.)
		During playback, enter a track number
		then press ENTER to skip directly to that
		track.
	CLEAR	Press CLEAR to clear a number entry and
	CLEAR	start again.
		While a PBC menu screen is displayed,
	ENTER	use to select numbered menu items.

BACK CM SKIP Video CD only: Each press skips backward/ forward progressively up to a maximum of

ten minutes forward or three minutes back. Note that this function doesn’t work when playing in PBC mode.

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to

change the playback speed (forward only). While paused, press to advance a single frame (forward only).

RETURN Press to display the disc menu of a Video

CD/Super VCD playing in PBC mode.

Note

1.If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amp/receiver with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels on page 58).

2.When playing in PBC mode, some playback features, such as search, repeat and program play are not available. You can play a PBC Video

CD/Super VCD in non-PBC mode by pressing to start playback instead of PLAY.

31

En