Pioneer DVR-530H-S, DVR-630H-S manual Problem, Can’t use One Touch Copy HDD to DVD

14Additional information

Problem Remedy

Front panel display shows ‘LOCK’ • The Child Lock is on; turn off in order to use the recorder (page 44). when a button is pressed

Can’t use One Touch Copy (HDD to DVD)

•Make sure that there is a recordable DVD loaded with some free space for recording and fewer than 99 titles already on the disc. Also make sure that for a Video mode disc, the disc isn’t finalized.

•If the title currently playing contains material that is copy-once protected, One Touch Copy will not work.

•If the currently playing HDD content was recorded in XP+ mode, the One Touch Copy feature can’t be used.

•One Touch Copy doesn’t work if the recorder is already recording to DVD.

Can’t use One Touch Copy (DVD to HDD)

•Make sure that there is space available on the HDD and that there are fewer than 999 titles on the HDD.

•One Touch Copy doesn’t work if the recorder is already recording to the HDD.

The picture freezes and the front panel and remote control buttons stop working

•Press STOP then try restarting playback.

•Press the front panel STANDBY/ON button to switch the power off, then switch back on and restart playback. If the power fails to switch off, press and hold

STANDBY/ON for 10 seconds until the power switches off.

The device connected to the USB port isn’t recognized

•Check that the device is compatible with this recorder (page 19).

•Use a USB cable shorter than five meters long.

•Check that the cable is properly connected at both ends.

•Try switching this recorder into standby then back on.

•Try using the Restart USB Device option (page 97).

Cannot import picture files from a connected USB camera

•Check that the device is compatible with this recorder (page 19).

•Check that the camera is switched on.

•If several USB devices (camera, USB memory, card reader, etc.) are connected together, it’s possible that only the first device connected to this recorder will be recognized.

Can’t print from the USB printer • Check that the device is compatible with this recorder (page 19).

•Connect the printer to the type B USB port on the rear of the recorder (page 12, page 19).

•Make sure that the printer is switched on.

•Try the Confirm Printer option to check that the recorder recognizes the printer (page 97).

•Depending on the printer, the index print option may not work.

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

104

En