Pioneer DVR-530H-S manual Getting started Using the built-in TV tuner, Changing TV channels, Nicam

04Getting started

Using the built-in TV tuner

Changing TV channels

There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.

HDDDVD

CH

ENTER

•CH +/– buttons on the remote

•Number buttons on the remote – For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4, ENTER.1

•+/– buttons on the front panel

Changing audio channels

You can change the audio channel of the broadcast or external input signal.

AUDIO

•Press AUDIO to change the audio.

The current audio channel is displayed on-screen.

•If the NICAM audio setting (see Nicam Select on page 93) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio.

NICAM

Regular

•If the NICAM broadcast is bilingual, you can also select the language.

NICAM A NICAM B

Regular NICAM A+B

•You can also select the language for a non-NICAM bilingual broadcast.

A (L) B (R)

A + B (L+R)

•When watching a recording made from an external input with Bilingual recording selected (see External Audio on page 94), you can switch the audio channel between left (L), right (R) or both (L+R).

L R

L+R

Tip

•When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a bilingual broadcast is recorded. In this case, decide which language you want to record before recording by setting the Bilingual Recording setting (see Bilingual Recording on page 94).

Note

1. Channel presets are numbered 1–99.

28

En