Roland Piano Using a Pedal to Modify the Sound Control Pedal, Making Control Pedal Settings

Modifying the Sound in Real Time

3.Press [8 (Close)] to close the Switch window.

Realtime controller settings are saved independently for each patch/performance as part of the patch/performance settings. This lets you create patches/performances that make effective use of controller settings.

Using a Pedal to Modify the Sound (Control Pedal)

You can modify the sound by pressing a pedal that is connected to the rear panel CTL 1/CTL 2 PEDAL jack.

Pedal such as expression pedals (EV-5; available separately), pedal switches (DP-2/6; available separately), or foot switches (BOSS FS-U; available separately) can be connected to the Fantom.

1.Access the PATCH PLAY screen (p. 31).

2.While playing the keyboard to produce sound, operate a pedal.

The sound will change according to the function that is assigned to the control pedal.

Making Control Pedal Settings

1.Press [MENU] to access the Menu window.

2.Use or to select “System Edit,” and then press [8 (Select)].

The System Edit screen appears.

3.Press [1 (▲)] or [2 (▼)] to select the “Controller” tab.

A screen like the following appears.

In this screen you can set the following parameters for the control pedals.

Pedal 1, 2 Assign: Specify the function that will be controlled by a pedal connected to the CTL 1 or CTL 2 PEDAL jack. Pedal 1, 2 Polarity: Switch the polarity of the pedal.

For details on each parameter, refer to “Controller Settings (Controller)” (p. 184).

4.Turn the VALUE dial or press [INC]/[DEC] to make the setting.

5.Press [EXIT] to return to the PATCH PLAY screen.

164