Roland Piano Rhythm Pattern Settings Rhythm Ptn, Rhythm Ptn Rhythm Pattern, Creating a Rhythm Set

Rx Hold-1 (Rhythm Tone Receive Hold-1 Switch)

For each rhythm tone, specify whether MIDI Hold-1 messages will be received (ON), or not (OFF).

If “NO SUS” is selected for Env Mode parameter (RHYTHM/ General), this setting will have no effect.

Rx Pan Mode (Rhythm Tone Receive Pan Mode)

For each rhythm tone, specify how pan messages will be received.

Value

CONTINUOUS: Whenever Pan messages are received, the stereo position of the tone will be changed.

KEY-ON:The pan of the tone will be changed only when the next note is played. If a pan message is received while a note is sounding, the panning will not change until the next key is pressed.

The channels cannot be set so as not to receive Pan messages.

Rhythm Pattern Settings (Rhythm Ptn)

For details on the setting, refer to “How to Make the Rhythm

Set Settings” (p. 69).

Rhythm Ptn (Rhythm Pattern)

Switch (Rhythm Pattern Switch)

Switch Rhythm pattern playback on/off.

Value: OFF, ON

Hold (Rhythm Pattern Hold Switch)

Switch between Hold On/Hold Off for the Rhythm pattern

playback.

Value: OFF, ON

Creating a Rhythm Set

Style (Rhythm Pattern Style)

Select the basic playback style of the Rhythm pattern.

	For details regarding Rhythm Pattern Style, refer to “Rhythm									Set
	Pattern Style List” (Sound/Parameter List).									Rhythma
the “groove” feel of the Rhythm pattern. A setting of “100%” will
Accent Rate (Rhythm Pattern Accent Rate)
Modifies the strength of accents and the length of the notes to adjust										Creating
Shuffle Rate (Rhythm Pattern Shuffle Rate)
produce the most pronounced groove feel.
Value: 0–100%
This setting lets you modify the note timing to create shuffle
rhythms.
With a setting of “50%” the notes will be spaced evenly. As the value
is increased, the note timing will have more of a “dotted” (shuffle)
feel.
Value: 0–100%
		Shuffle Rate = 50%				Shuffle Rate = 90%
	50		50	50	50	90	10	90	10

Shuffle Resolution (Rhythm Pattern Shuffle Resolution)

Specify the timing resolution in terms of a note value. The note value can be specified as either an 16th note or a eighth note.

Value: ,

Keyboard Velocity (Rhythm Pattern Keyboard Velocity)

Specifies the loudness of the notes that you play.

If you want the velocity value of each note to depend on how strongly you play the keyboard, set this parameter to “REAL.” If you want each note to have a fixed velocity regardless of how strongly you play the keyboard, set this parameter to the desired value (1– 127).

Value: REAL, 1–127

Note Assign (Rhythm Pattern Note Assign)

Specify the note name of the lowest note in the key range that will play the Rhythm pattern. The Rhythm pattern can be played in a one-octave range starting from the key you specify here.

Value: C-1–G9

Key Trigger (Rhythm Pattern Key Trigger)

Turn this “ON” if you want the rhythm pattern to start at the moment that you press the key. If you want the rhythm pattern to start playing in synchronization with the sequencer or arpeggio, turn this “OFF.”

Value: OFF, ON

75