Roland Piano owner manual Moving Sequencer Data Move, Copying Sequencer Data Copy, 157

Moving Sequencer Data (Move)

You can move an individual item of sequencer data to a different location. Data recorded in the tempo track or beat track can also be moved in the same way.

It is not possible to move the tempo change located at the beginning of the tempo track, the beat change and key signature located at the beginning of the beat track, or the pattern beat.

1.Access the Microscope window for the track or pattern whose data you want to move (p. 153).

2.Press or to move the cursor to the sequencer data that you want to move.

To move a multiple consecutive data, hold down [SHIFT] and

press to select the sequencer data.

3.Press [3 (Move)].

The Move Event window appears.

4.Move the cursor to measure, beat, and clock, and set these values to specify the move destination.

5.Press [8 (Execute)] to move the sequencer data.

When the sequencer data has been moved, you will return to the Microscope window.

If you are not satisfied with the results of executing this operation, press [MENU], and from the Menu window that appears, select “Undo Micro Edit” to return to the state prior to execution (Undo).

Editing Songs

Copying Sequencer Data (Copy)

Sequencer data can be copied to the desired location. This is convenient when you want to use the same sequencer data at multiple locations. Data recorded in the tempo track or beat track can also be copied in this way.

1.	Access the Microscope window for the track or pattern
	whose sequencer data you want to copy (p. 153).
2.	Press	or	to move the cursor to the sequencer data
	that you want to copy, and press [4 (Copy)] to copy it.
	To copy a multiple consecutive data, hold down [SHIFT] and
	press	to select the sequencer data.
3.	Press	or	to move the cursor to the location at which
	you want to insert the copied sequencer data.
	If the location at which you want to insert the sequencer data is
	not shown in the display, move the cursor to the appropriate
	location (measure-beat-clock), and then specify the insert
	location for the sequencer data.
4.	Press [5 (Place)] to paste the data.
	If you are not satisfied with the results of executing this
	operation, press [MENU], and from the Menu window that
	appears, select “Undo Micro Edit” to return to the state prior to
	execution (Undo).		SongsEditing

157