Roland Piano Using Knobs or Buttons to Modify the Sound Realtime Controller, Time, Modifying the

For details on each parameter, refer to “Realtime Controller / D Beam Controller Settings (Controller)” (p. 52).

2.Move the cursor to the parameter that you want to set, and turn the VALUE dial or press [INC]/[DEC] to make the setting.

3.Press [8 (Close)] to close the D Beam window.

Settings for the D Beam controller are saved independently for each patch/performance as part of the patch/performance settings. This lets you create patches/performances that make effective use of controller settings.

Using Knobs or Buttons to Modify the Sound (Realtime Controller)

You can use the REALTIME CONTROL knobs and buttons to modify the sound in real time.

1.Access the PATCH PLAY screen (p. 31).

The “Realtime Control” area shows the function that is assigned to each realtime controller knob and button. [ ]–[ ] indicate the knobs, and [ ]–[ ] indicate the buttons.

The MULTITIMBRE PLAY screen does not have a “Realtime Control” display.

2.While playing the keyboard to produce sound, operate the REALTIME CONTROL knobs and buttons.

The sound will change according to the function assigned to each knob or button.

Modifying the Sound in Real Time

Making Realtime Controller Settings

Realtime Controller Knob Settings

1.Hold down [JUMP] and turn one of the REALTIME CONTROL knobs.

The Knob window appears.

	In this window you can set the following parameters for the
	REALTIME CONTROL knobs.
	Assign: Specify the function that will be controlled by the
	realtime control knob.
	If you are using this in Performance mode, a Zone parameter
	will be added to the parameters listed above. This parameter
	specifies the zone that will be controlled by the realtime control
	knob.
	For details on each parameter, refer to “Realtime Controller / D
	Beam Controller Settings (Controller)” (p. 52).	Time
2.	Move the cursor to the parameter that you want to set, and
	turn the VALUE dial or press [INC]/[DEC] to set it.	Realin
3.	Press [8 (Close)] to close the Knob window.

Realtime Controller Button Settings

1.	Hold down [JUMP] and press a REALTIME CONTROL	Sound
	button.
	The Switch window appears.	Modifying the

In this window you can set the following parameters for the realtime control buttons.

Assign: Specify the function that will be controlled by the realtime control button.

Mode: Specify how the realtime control button will operate.

If you are using this in Performance mode, a Zone parameter will be added to the parameters listed above. This parameter lets you specify the zone that will be controlled by the realtime control button.

For details on each parameter, refer to “Realtime Controller / D Beam Controller Settings (Controller)” (p. 52).

2.Move the cursor to the parameter that you want to set, and turn the VALUE dial or press [INC]/[DEC] to make the setting.

163