Roland Piano How to Make the System Function Settings, Saving the System Settings Write, 178

Settings Common to All Modes (System Function)

Settings that affect the entire operating environment of the Fantom, such as tuning and MIDI message reception, are referred to as system functions. This section explains how to make settings for the System functions and describes the functions of the different System parameters.

How to Make the System Function Settings

1.Press [MENU] to open the Menu window.

2.Press or to select “System Edit,” and then press [8 (Select)].

The System Edit screen appears.

fig.15-01_50

The lower part of the screen indicates the Wave Expansion Board installation status, and the program version.

3.The parameters are organized into several edit groups. Press [1 (▲)] or [2 (▼)] to select the tab of the edit group that contains the parameter you want to set.

For details on how the parameters are grouped, refer to

“Parameter list” (Sound/Parameter List).

4.Use [CURSOR] to move the cursor to the parameter you wish to modify.

•Some of the parameters have a “ ” symbol. This indicates that if you press [LIST] when setting one of these parameters, the related window will appear. For example if you press [LIST] at a parameter that requires you to specify a name, the Name window will appear.

•When all the parameters cannot be shown within a single settings screen, a scroll bar will be displayed at the right side of

the screen. In such cases, press to scroll the screen downward.

5.Turn the VALUE dial or press [INC]/[DEC] to get the value you want.

6.Repeat steps 3–5 to make the settings for the System function.

7.To save the settings you modified, press [6 (Write)] and perform the Write operation. If you do not want to save, press [EXIT] to return to the previous screen.

Initializing the System Settings (Init)

The current settings of the system functions can be restored to a set

of standard settings, or to the factory settings.

1.Access the System Edit screen.

2.Press [7 (Init)].

The System Initialize window appears.

fig.15-02_50

3.Press [8 (Execute)].

The settings will be initialized, then you’ll be returned to the previous screen.

Saving the System Settings (Write)

Changes you make to the System function settings are only temporary—they will be discarded as soon as the power is turned off. If you want to keep any changes you’ve made in the system settings, you must save them in internal system memory.

When you perform the save procedure, the data that previously occupied the save destination will be lost. However, the factory setting data can be recovered by performing the Initialization procedure.

1.Change the system function settings, and press [6 (Write)].

The System Write window appears.

fig.15-03_50

2.Press [8 (Execute)].

The display will indicate “Are you sure?”

3.Press [8 (OK)] to execute the save operation. To cancel the operation, press [EXIT].

178