Roland Piano Making Reverb Settings Reverb, Setting Procedure, Functions of Parameters

In this setting screen, you can edit the parameters of the chorus/ delay that is selected by the Chorus Type setting. For details on the parameters that can be edited, refer to “Chorus Parameters” (Sound/Parameter List).

Making Reverb Settings (Reverb)

Here we will explain how to make reverb settings in Performance mode. The procedure is the same when making settings in Patch mode or Multitimbre mode.

Setting Procedure

1.Select the sound to which you want to apply the reverb (p. 85).

2.Press [MENU] to access the Menu window.

3.Press or to select a “Performance Edit,” and then press [8 (Select)].

The Performance Edit screen appears.

4.Press [1 (▲)] or [2 (▼)] to select the “Reverb” tab.

The reverb parameter setting screen appears.

5.Use [CURSOR] to move the cursor to the parameter you wish to modify.

6.Turn the VALUE dial or press [INC]/[DEC] to get the value you want.

7.Repeat steps 5–6 to make the reverb settings.

8.If you wish to save the changes you’ve made, press [6 (Write)] to perform the Save operation (p. 93). If you do not wish to save changes, press [EXIT] to return to the previous screen.

Functions of Parameters

Reverb

Adding Effects

Type (Reverb Type)

Selects the type of Reverb.

Value

0 OFF: Reverb is not used.

1 REVERB: Normal Reverb

2 SRV ROOM: This reverb simulates typical room acoustic

reflections.

3 SRV HALL: This reverb simulates typical concert hall acoustic

reflections.

4 SRV PLATE: This reverb simulates a reverb plate, a popular type of artificial reverb unit that derives its sound from the vibration of a metallic plate. You can also achieve unusual metallic-sounding reverbs using “SRV PLATE.”

5 GM2 REVERB: General MIDI 2 reverb

In this setting screen, you can edit the parameters of the reverb that is selected by the Reverb Type setting. For details on the parameters that can be edited, refer to “Reverb Parameters” (Sound/Parameter List).

Adding Effects

177