Roland Piano owner manual Ext Bank Select LSB External Bank Select LSB, Ext Level External Level

Ext Bank Select LSB (External Bank Select LSB)

If you want a Bank Select number LSB (controller number 32) to also be transmitted when you switch performances, specify the value that you want to transmit (0–127) for each zone.

Value: 0–127

The data of the zone for which the External Switch is turned off will not be transmitted.

Ext Program Number (External Program Change Number)

If you want a Program Change number to also be transmitted when you switch performances, specify the value that you want to transmit (0–127) for each zone. If you do not want this message to be transmitted, set this to “---.”

Value: 1–128, ---

The data of the zone for which the External Switch is turned off will not be transmitted.

Ext Level (External Level)

If you want Volume messages to also be transmitted when you select a performance, specify the desired value (0–127) for the zone. If you do not want this message to be transmitted, set this to “---.” Value: 0–127, ---

The data of the zone for which the External Switch is turned off will not be transmitted.

Ext Pan (External Pan)

If you want Pan messages to also be transmitted when you select a performance, specify the desired value (L64–0–63R) for the zone. If you do not want this message to be transmitted, set this to “---.” Value: L64–0–63R, ---

The data of the zone for which the External Switch is turned off will not be transmitted.

Key Range Lower (Keyboard Range Lower)

Specifies the lowest note that the tone will sound for each zone.

Value: C-1–UPPER

Key Range Upper (Keyboard Range Upper)

Specifies the highest note that the tone will sound for each zone.

Value: LOWER–G9

Creating a Performance

When the Key Range (p. 59) is set for each individual tone in a patch, sounds are produced in the range where the Key Range of each tone and the Key Range for the zone overlap.

Key range specified for Performance

				Performance
			Key range specified for Patch
	The range in which notes will play
		If you attempt to raise the lower key higher than the upper key,
		or to lower the upper key below the lower key, the other value		a
		will be automatically modified to the same setting.
				Creating
Control Bender (Control Pitch Bend Switch)
For each zone, specify whether MIDI Pitch Bend messages will be
transmitted (ON), or not (OFF).
Value: OFF, ON

Control Aftertouch (Control Aftertouch Switch)

For each zone, specify whether MIDI Aftertouch messages will be transmitted (ON), or not (OFF).

Value: OFF, ON

Control Modulation (Control Modulation Switch)

For each zone, specify whether MIDI Modulation messages will be transmitted (ON), or not (OFF).

Value: OFF, ON

Control Hold Pedal (Control Hold Pedal Switch)

For each zone, you can specify whether control messages from a pedal connected to the HOLD PEDAL jacks will be transmitted (ON), or not (OFF).

Value: OFF, ON

Control Pedal 1, 2 (Control Pedal 1, 2 Switch)

For each zone, you can specify whether control messages from a pedal connected to the CTL 1 and CTL 2 PEDAL jacks will be transmitted (ON), or not (OFF).

Value: OFF, ON

99