Roland Piano Saving a Chain to Disk Save, 123, Songa, Back, Press 8 Execute to save the file

5.Use or to specify the songs in the chain, in the desired order of playback.

•By holding down [SHIFT] and pressing or you can jump to the beginning or end of the song list.

•By pressing [6 (Select All)] you can add all songs on the disk to the chain.

•To add sounds (data files) to the chain, press [4 (Sound)], and make your selection in the Select Sound window that appears.

6.When you are finished selecting songs for the chain, press [EXIT] to close the Select Song File window.

•If a chain already exists in internal memory, you can insert additional songs at the cursor location (the current step).

•By holding down [SHIFT] and pressing or you can jump to the first or last step.

7.Next, specify how the songs registered in the chain are to begin playing (Play Mode). In the chain, move the cursor to the song whose Play Mode you want to set, and press [7 (Play/Wait)] to switch the setting.

PLAY: The song will begin playing automatically.

WAIT: The song will begin playing when you press [STOP/ PLAY].

Playing Back a Song

Saving a Chain to Disk (Save)

Any chain you create can be saved to disk as a Chain file.

1.Into the disk drive, insert the disk on which you want to save the chain file.

2.Access the Chain Play screen (p. 122).

3.Press [2 (Save)].

The Save Chain File window appears.

4. Assign a file name (up to 8 characters). Press [5 (Name)],

and in the Name window that appears, assign the desired file name.

	For details on assigning a name, refer to “Assigning a Name”	Songa
	(p. 30).
	If you want to see a list of the chain files saved on the disk, press	Back
	[6 (List)]. If you want to select one of these file names, move the
	cursor to the desired chain name, and press [8 (Select)].	Playing
5.	Press [8 (Execute)] to save the file.

The chain file will be given a filename extension of “.SVC”.

• If you assign a file name that is the same as the name of a file already existing on the disk, and attempt to perform a save, a message of “File “****” Already Exists! Over Write OK?” will appear. If it is OK to overwrite the existing file, press [7 (OK)]. To cancel the Save operation, press [8 (Cancel)].

• If you attempt to save data on a disk that has not been formatted

by the Fantom, a message of “Unformatted Disk” will appear. Please format the disk on the Fantom (p. 191).

123